Get matched with top epoxy flooring pros in Zuni, NM

Concrete coatings protect surfaces from wear, physical damage, abrasion, stains, spills, moisture, and weather. This protection extends the life of the concrete, adds durability, and can also improve aesthetics and safety.

Garage floor sealers last anywhere from one to 10 years on average, depending on the type of sealer you use and the traffic it’s exposed to. Acrylic sealers have the shortest longevity, whereas most other options can last anywhere from five to 10 years. If you use an acrylic sealant to protect against stains, reapply every one to two years. Reapply other types of concrete sealers every five years for the best results and maximum protection.

You’ll usually need to prime a garage floor before painting—especially if the floor is unpainted. Garage floors are made from concrete, which is porous and produces dust. The dust can contaminate the paint and cause issues with adherence. 

Primer creates a barrier and gives you a clean surface to work on. It also minimizes absorption to help give you an even, pro-looking paint job. Make sure you choose a primer that’s specifically designed to cover concrete flooring.

Yes, you can seal old or existing concrete, but proper preparation is crucial. The concrete surface must be clean, dry, and free of any incompatible old sealant. To check if an old sealer is present, drip a few drops of water onto the surface; if the water is absorbed in under five minutes, it's ready to be resealed. If you plan to use the same type of sealer that was previously applied, you may not need to remove the old layer. However, if you are using a different type of sealer, the old one must be completely removed. Before applying the new sealer, thoroughly clean the concrete and repair or fill any cracks to ensure a smooth, well-prepared surface.