Get matched with top sink repair pros in Laguna, NM

Yes, you can remove an undermount sink from granite countertops. However, it’s safest to hire a granite pro to take on this job. Your pro might have to make cuts and grind the granite to remove the sink. Plus, if you’re replacing your sink with a larger one, you’ll need your pro to enlarge the existing sink cutout in your granite.

Replacing the countertop with another that fits the same size and cut out shouldn't take longer than four to five hours. The installation job entails removing the plumbing connections, unscrewing the old sink connectors, removing the countertop, placing and gluing the new countertop, and connecting the plumbing hookups.

Install the sink between 30 inches and 34 inches away from the floor. However, this height could be adjusted accordingly for particularly tall or short residents. To accommodate wheelchair users, the vanity should leave a space underneath that is at least 29 inches tall, 30 inches wide, and 25 inches deep.

Yes, it is often possible to replace an undermount sink without removing the countertop, but success can depend on the countertop material. For materials like granite, the process is relatively straightforward. However, laminate or uniquely shaped countertops might need to be removed or modified.

The process typically involves shutting off the water supply, disconnecting the drain and plumbing pipes, cutting through the old silicone seal, and carefully lowering the sink from below. This requires a good understanding of plumbing and the right tools. If you are not confident in performing the replacement yourself, it is recommended to hire a countertop specialist or a plumber to handle the task.