Get matched with top countertop repair pros in Crownpoint, NM

You can likely use spray paint or a paint sprayer for your laminate countertops. You should prep the space the same way as if you were painting with a roller or brush, making sure to cover any areas that you want to protect with a drop cloth or plastic sheets.

Countertops typically hang over base cabinets by 1.5 inches. This slight overhang protects cabinet faces from spills and provides a finished look. The overhang may extend 12 inches or more for kitchen islands or breakfast bars to allow for seating and comfortable eating.

If you are building a laminate countertop from scratch, instead of buying premade laminate countertops, you can use particle board underneath the laminate. You will need to use a sheet of particle board for the substrate, along with four-inch strips underneath the edges. For proper installation, make sure that any seams are level and use a sander as necessary before installing the laminate.

Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.

For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.

After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.