Get matched with top garage door pros in Cerro, NM

Yes, you can pressure wash epoxy floors, but you must take precautions to avoid damaging the surface. While most epoxy floors can be cleaned with a mop, you might choose to pressure wash if the floor is stained, has ground-in dirt, or is covered with mold or mildew. To do so safely, first soak any stains or dirty areas with a gentle cleanser. Use a lower pressure setting with a gentle nozzle, such as a green, white, or black tip, or a 45-degree angled tip. Keep the spray nozzle at least 18 inches away from the floor to protect the surface. Using a surface cleaner attachment or a rotary scrubber can also help prevent overspray. Be cautious if using a power washer that heats the water, as the combination of heat and pressure may be too powerful and could damage the epoxy coating.

Although the cost of glass garage doors is a concern, a bigger concern is safety against high-wind storms and burglars breaking the glass. If you use tempered or impact glass on your garage door, it’s more shatter-resistant than standard glass. This is safer in a storm where you don’t want shards of glass flying around. However, if a burglar wants to access your garage, the glass door is easier to break into than a solid wood or metal garage door. 

The level of insulation is determined by both the material and the thickness of the door. Some garage door materials (such as wood) have natural insulating capabilities, while other materials (such as metal) do not. No matter the material, two-layer and three-layer garage doors have a higher R-value than single-layer garage doors, as insulation is fitted between the panels. 

As with anything you buy, be wary of prices that seem too good to be true. Some low-cost flooring products can contain chemicals that release harmful VOCs (volatile organic compounds) in the form of fumes that can be inhaled or dust that can cause skin conditions.

Even good-quality products can be dangerous for DIY-ers who don’t take proper precautions. Always carefully read manufacturer instructions and wear the recommended protective gear when working with paints and other chemicals. You can also hire a local garage flooring pro with the experience and equipment needed to perform the installation safely with no lingering fumes or debris.