Get matched with top roofers in Watchung, NJ

Building code allows 24-inch on-center spacing for roof trusses. However, you can install them on 12- or 16-inch centers to handle large loads or other exceptional circumstances. In cases such as covering a wide span or supporting alternative roofing materials, where a structural engineer needs to evaluate or create a design for your trusses, the plans will indicate the spacing. 

You may become so frustrated with the look of moss on your roof that you contemplate whether to clean or replace your roof. Fortunately, you don’t have to go as far as replacing it. After cleaning the moss, you can use a chemical solution to keep it away. For further protection, trim branches that overhang the roof, as fallen seed pods and leaves on the roof allow moisture to collect, encouraging moss growth. Consider adding zinc-coated flashing to the roof, too. As rain washes across the zinc, it leaves zinc particles behind that inhibit moss growth.

The proper specifications for furring strips can vary, so you should always consult the roofing manufacturer's guidelines or your roofer. However, general recommendations are as follows:

• Thickness: Furring strips are typically 1 to 1-1/2 inches thick, meaning standard 1-by or 2-by lumber works well. In areas with extreme winds, a thinner strip may be preferred to limit how much air can get under the roof and cause uplift. A thicker strip can add slightly more insulation but will also increase installation costs.

• Spacing: The recommended spacing for furring strips is between 12 and 24 inches apart on center. Proper spacing is crucial for ensuring good airflow, adequate drainage, noise reduction, and better energy efficiency. The ideal spacing can depend on the roof's pitch and the specific type of metal roofing being installed.

Yes, copper roof strips can help prevent shingle damage and are an alternative to algae-resistant shingles. They work in a similar way: they release copper ions that interfere with algae, moss, and other plant growth. Algae feeds on limestone in your roof shingles, and moss can uplift shingles and increase the risk of leaks. If you have issues with algae or moss on your roof, copper roof strips can help avoid damage.