Top-rated welders.

Get matched with top welders in Tabernacle, NJ

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Tabernacle, NJ?

Select your specific project to find the pro for you.

Find Welders in Tabernacle

Avatar for Hyphen Builder
Hyphen Builder
5.0(
6
)

Serving Tabernacle, NJ and surrounding areas

Approved

Free estimates

Credit card accepted

Offers commercial services

"He was very professional & my family was very pleased with how good the deck looked after he finished painting it. He also did a great job on the installation of a storm door going from my kitchen."
1 neighbors recently requested a quote
Grady's Painting Plastering/Construction
2.0(
174
)

Serving Tabernacle, NJ and surrounding areas

Approved

In business since 1969

Free estimates

Emergency services offered

"I needed stucco repair work on an old chimney (and other spots). Grady was meticulous and thoughtful on what approaches and materials would work. Throughout the project they allocated sufficient time for each treatment to cure and inspected the work before proceeding to the next step. Grady started the project with no money down and only required ongoing payments for materials until the project was well underway. The final payment was due only after they did a final inspection. Total project cost was also below other bids."
Response time11 hrs
Response rate100%
1 neighbors recently requested a quote
Avatar for Boris Iron Works, Inc.
Boris Iron Works, Inc.
4.2(
92
)

Serving Tabernacle, NJ and surrounding areas

In business since 2010

Free estimates

Credit card accepted

"Very good professional workers, very helpful, courteous, attached to my budget, they really did an excellent work, they came back and checked for the project, I would recommend them to anybody."
Response time1 day
Response rate89%
Recommended by97%of homeowners
Avatar for FLOURTOWN SERVICE CENTER
FLOURTOWN SERVICE CENTER
5.0(
15
)

Serving Tabernacle, NJ and surrounding areas

In business since 1979

Free estimates

Credit card accepted

"See above.  Several weeks ago I had my air conditioning compressor replaced.  These people (Matt and Jess) are professional, friendly and do what they say they will, for a reasonable price, and the car is ready when they say it will be ready.  They are reliable and honest.  I left my old mechanic over two years ago (for overcharging me on a repair that wasn't needed) and having been doing the normal rounds of the chain tire stores for service since then.  This is an old fashioned neighborhood mechanic, with modern equipment, honest people, doing fine work for a good price.   I am delighted to have found them through Angie's list.  Just another example of why I use Angie's list for every new vendor I go to. 
"
Recommended by100%of homeowners
Avatar for A Champion Chimney & Masonry
A Champion Chimney & Masonry
4.0(
723
)

Serving Tabernacle, NJ and surrounding areas

In business since 2002

Free estimates

Emergency services offered

"My initial impression was that this was an honest company and I had dealt with them for chimney cleaning before.  I still feel they are honest, but that doesn't mean that you will get exactly what you need.  And it does not compensate for the lack of care and professionalism in my opinion.  I had had multiple conversations with them about what I want vs. what they recommended.  I just wanted to a couple of broken stone tiles to be replaced, but I was told that they do not do small repair jobs, they want to "do it right" and address all the stones and grout throughout the three steps I have.  I trusted them to do a good job, so I agreed.  But, then I was pushed into having sealant applied to the stone, although I said multiple times that I didn't necessarily want that.  In the end, I agreed to the larger job and the application of the sealant.  The day that the job was performed, I came home and from a distance the steps looked nice and refreshed, but when I looked more closely, I realized that all of the broken stone tiles I had asked to be replaced were put back on as they were and at several different places the steps were not even level, including right in front of my house where water would collect and form an ice sheet.  It became clear to me that they were not supervised at all.  Upon my complaint, one old half tile did get replaced with a newer haIf tile. But, since that was not addressing much, I asked to meet with the person who I had been talking to about this project, but he could not make time to do so.  So, eventually, I made an appointment saying I was staying home from work to be available to speak face to face and he never showed.  He is too busy to spend 15 minutes with the client - who he is forgetting is at least as busy as he is, but is making time for him.  I was very frustrated with his behavior, and now I was forced to explain via email how what I had asked for originally had not been done.  All I wanted was to have a couple of broken tiles to be replaced and placed evenly.  They did everything but what I wanted.  I was still hoping to work something out with them, but all I got was a proud, unapologetic and defensive dismissal.  Instead of taking responsibility for their mistakes and working with me on completing it to address what I wanted to have done in the first place, I was told that it would cost them too much and that they wouldn't do it.  The honest part comes here - they refunded the amount I had already paid them.  I wish it could have been different and instead of losing their whole commission on the job, they could take a smaller hit and take care of their customer.  The only problem is that this was a proud person with a negative attitude, so he chose his pride over the bottom line and customer satisfaction.  I find this capricious and unprofessional, but of course they have a right to give your money back and not do the job.  Consequently, I was back to where I started, with the crooked steps, and the old broken tiles, looking for another mason to do the job. Sorry, Champion.  I really did have a really good opinion of you, before this whole experience.  But, you left me very very unhappy. 
"
Additional Photos
Additional Photos
Additional Photos
Recommended by81%of homeowners
WPT Welding
New to Angi

Serving Tabernacle, NJ and surrounding areas

In business since 2020

Emergency services offered

WPT Welding specializes in repairs and fabrication of : railings, stairs, window gates, security doors , roof ladders, basement doors , catwalks and more . \n\nWPT Welding is owner operated . We have certified welders with years of experience in various sectors of the welding industry. We are a one stop shop, you get repairs on site , fabrication and installation of new steel and priming and painting of all steel .

Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+11

Avatar for Verdolina Welding, LLC
Verdolina Welding, LLC
5.0(
1
)

Serving Tabernacle, NJ and surrounding areas

In business since 2020

Free estimates

Credit card accepted

"We had Russell came in for a job, where he had to a track training for the MTA and complete 30 hours OSHA training. He did it all done in a week; he completely fixed all of the welding and he did a fantastic job.Everyone on the project had nothing but good things to say about him, he is a very good team player!"
tie in welds in the field
tig welding process
Response time1 day
Recommended by100%of homeowners
...
Showing 1-10 of 53
Welding questions, answered by experts

Your typical household tools will not cut a metal pipe. To cut a metal pipe, you’d need more specialized tools like a pipe cutter or circular saw. Do not attempt to use these tools without taking proper safety precautions and wearing safety gear. It’s usually safer to let a pro cut a metal pipe, especially if you’re not confident in your skills with a heavy-duty saw.

Some welding projects, such as repairing pipes or fences, require travel, whereas others, like furniture repair, do not necessarily require the welder to come to you. Travel and overhead factor into the overall cost of your welding project. Some of the most common welding projects include:

  • Metal furniture repair: $35–$100

  • Pipe repair: $200–$1,000

  • Small gates: $550–$750

  • Fencing: $1,200–$1,800

  • Fabricated sheet metal welding: $750–$2,500

Cutting round ductwork requires precision and the right tools. A duct cutter, specifically designed for circular ducts, is ideal. First, mark the cutting line on the duct using a measuring tape and pencil. Then, position the duct cutter's blade on the marked line. Apply steady pressure, rotating the cutter around the duct. The sharp blade creates a clean, precise cut. Alternatively, a reciprocating saw with a metal-cutting blade can be used for larger round ducts. Ensure the duct is securely held in place while making the cut to prevent slips and maintain accuracy.

Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective. 

Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation. 

Professional metal fabricators typically charge around $70 per hour, but the total cost of your project will depend on several factors. The largest cost drivers are the size, complexity, and design of the project, as well as the price and type of metal used. A good way to estimate the total cost is to multiply the cost of raw materials by four; typically, one-quarter of the total goes toward materials and three-quarters toward labor. Your geographic location can also influence costs, as labor and material prices vary by region.

The Tabernacle, NJ homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.