Get matched with top sandblasting pros in Orford, NH

Q: Which costs more: soda blasting or sandblasting?

• <div><p>Soda-blasting systems are slightly more expensive than sandblasting systems. To soda blast, you&rsquo;ll need to spend a few hundred dollars for a blast hose and nozzle, a compressed air supply, a blast generator, a moisture decontamination system, and sodium bicarbonate media, a recurring cost because the powder is not reusable. To start with sandblasting, you will need to spend upwards of $30 for a blast pot, a blast gun, an air compressor, and sandblasting media, many of which are recyclable&mdash;further reducing the cost. The total cost for either will depend on the size of the system.</p></div>

Q: Do you sand concrete wet or dry?

• <div><p>You can concrete can be done when it&rsquo;s wet or dry. However, it&rsquo;s safer when wet, as harmful dust and chemicals are present. Sanding it when dry is faster, but you&rsquo;ll agitate more dust and chemicals, meaning you&rsquo;ll need to be more careful.</p></div>

Q: Is sandblasting dangerous?

• <div><p>There are two ways sandblasting could be dangerous: improper use of the equipment so that the stream touches your skin, and air particles created during the sandblasting process. While the first is easier to avoid and fairly obvious, the second has the potential to be more serious and is much more difficult to understand. This is why you should always hire a pro to sandblast, as they understand the dangers associated with the process. If proper safety measures are taken, then sandblasting is rarely dangerous. </p></div>

Q: How much does it cost to sandblast a door?

• <div><p>Your pro will most likely bill you at an hourly rate of <b>$50 to $80 per hour</b> to sandblast a door due to its small size. This type of job won't take long, so if you have other surfaces that need cleaning, schedule those tasks at the same time to get your money's worth from your pro's visit.</p></div>

Q: How do I maintain sandblasted surfaces?

• <div><p>Regular sealing and repainting help maintain the restored surface&rsquo;s durability.</p></div>

Enter your ZIP and get matched with up to 5 pros

Need a pro for your sandblasting service project in Orford, NH?

Select your specific project to find the pro for you.

Verified Reviews for Sandblasting Service pros in Orford, NH

*The Angi rating for Sandblasting Service companies in Orford, NH is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Sandblasting Service needs.

*The HomeAdvisor rating for Sandblasting Service companies in Orford, NH is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Sandblasting Service needs.

Last update on December 10, 2025

Reviewed in March 2025
Ben from Paragon Construx did a service upgrade for me with some miscellaneous repairs that went along with the project. He was very thorough and always on time and efficient. Very knowledgeable and professional. I look forward to working with Ben in the future for all our electrical needs....
Paragon Construx LLC
Request a quote
Reviewed in December 2024
The Best. Great customer service and workmanship! Very satisfied.
Northman Gutters
Request a quote
Reviewed in January 2022
BA Gordon was a pleasure to work with! On-time and great service! Hope to have them back soon for follow on work.
BA Gordon Insulation
Request a quote
Reviewed in August 2021
Fast and on time service. Also very pleasant, professional and replaced well pump with one call and within hours of pump breakdown. Phil brought everything needed in single service and my water was restored, absolutely amazing.
Phil Brien Water Wells, LLC
Request a quote
Reviewed in May 2021
great interaction on services and feedback from staff
Rowell's Services, LLC
Request a quote
Reviewed in June 2020
Great service - flexible to work on scheduling. Great customer service. Thanks so much!
CRS Heating and Cooling
Request a quote

Find Sandblasting pros in Orford

Barton's Perfection +, LLC

4.10(

)

•Approved Pro

Barton's Perfection +, LLC

4.10(

)

•Approved Pro

Customers say: Quick response

6 years of experience

Free onsite estimate

With over 21 years of experience in the general contracting industry, we are the experts you need to take care of your home or business. Start that 2023 year off with perfection + Licensed & Insured! MOST IMPORTANTLY : We understand not every customer is looking for just good work. They're looking to find a go to. Someone who not only astounds them with their work but astounds them with transparency! Astounds them with glowing positive energy on the first encounter which grows a powerfully stout trust between individuals! Here is a link to our facebook page. Many reviews by trusted repeat customers and just another great way to get familiar with Barton's Perfection + LLC. Here is the link. https://www.facebook.com/BartonsPerfectionPlus/ Owner - CodyBarton 802 - 369 - 9656 Barton's Perfection + LLC

"We hired Cody to do some wallboard repair and to replace 4 interior Luan doors with 4 standard Masonite slabs in existing pre-hung door frames. The wall repair came out great, but the doors turned out to be well beyond his skill level. A carpenter friend had measured and delivered the doors to us, but he became too busy to do the work so we hired Cody. Surprisingly Cody claimed the standard doors were 1/8â too wide and too tall, and that both the width and height had to be trimmed. We questioned him but trusted his â expertiseâ and relented. He wound up cutting off so much of the width and height that we are left with visible gaps between the doors and the jambs. And because the barrel of the doorknobs did not reach the strike plates, he "fixed" his mistake by â doubled upâ two strike plates on each door so three catch - the fourth still doesn't. In short, he ruined $400 worth of doors, which have to be replaced â and installed â by a competent contractor. Cody refuses to discuss a solution, claiming that he warned us that trimming the doors would be problematic, and blaming us for telling him to cut the doors â all of which we vigorously deny. He was the one who suggested the â fix,â and we trusted he knew what he was doing. It wasnâ t until he was finished that we saw the horrific mistakes and that his workmanship was abysmal. Weâ ve never written a bad review but cannot recommend Bartonâ s Perfection if you need carpentry work. His work was far from â perfection.â"

Tom C on August 2024

"We hired Cody to do some wallboard repair and to replace 4 interior Luan doors with 4 standard Masonite slabs in existing pre-hung door frames. The wall repair came out great, but the doors turned out to be well beyond his skill level. A carpenter friend had measured and delivered the doors to us, but he became too busy to do the work so we hired Cody. Surprisingly Cody claimed the standard doors were 1/8â too wide and too tall, and that both the width and height had to be trimmed. We questioned him but trusted his â expertiseâ and relented. He wound up cutting off so much of the width and height that we are left with visible gaps between the doors and the jambs. And because the barrel of the doorknobs did not reach the strike plates, he "fixed" his mistake by â doubled upâ two strike plates on each door so three catch - the fourth still doesn't. In short, he ruined $400 worth of doors, which have to be replaced â and installed â by a competent contractor. Cody refuses to discuss a solution, claiming that he warned us that trimming the doors would be problematic, and blaming us for telling him to cut the doors â all of which we vigorously deny. He was the one who suggested the â fix,â and we trusted he knew what he was doing. It wasnâ t until he was finished that we saw the horrific mistakes and that his workmanship was abysmal. Weâ ve never written a bad review but cannot recommend Bartonâ s Perfection if you need carpentry work. His work was far from â perfection.â"

Tom C on August 2024

Get matched with top sandblasting pros in Orford, NH

Enter your ZIP and get matched with up to 5 pros

Need a pro for your sandblasting service project in Orford, NH?

Handyman for Multiple Small Project Service

Interior Painting or Staining Service

Small Projects Painting or Staining

Verified Reviews for Sandblasting Service pros in Orford, NH

Find Sandblasting pros in Orford

Barton's Perfection +, LLC

Barton's Perfection +, LLC

Sentri Homes

Sentri Homes

Enlightened Exteriors

Enlightened Exteriors

JLCC

JLCC

Northern Vermont handyman

Northern Vermont handyman

Bs quality painting and pressure washing

Bs quality painting and pressure washing

Bowen Painting

Bowen Painting

Green mountain pressure washing & property maintenance

Green mountain pressure washing & property maintenance

Stithens Outdoor Services

Stithens Outdoor Services

John's one call does it all

John's one call does it all

The Orford, NH homeowners’ guide to sandblasting services

How Much Does It Cost to Paint a Brick House? [2025 Data]

How Much Does It Cost to Paint a Pool Deck? [2025 Data]

How Much Does It Cost to Paint a Stucco House?

The Best Way to Stain Your Deck

Can You Paint a Vinyl Fence? What the Experts Say

How to Whitewash Brick in 7 Simple Steps

Find Sandblasting service Pros in other cities near youNot finding what you are looking for in Orford? Check surrounding areas for Sandblasting pros.

Which Sandblasting service task are you tackling?Find Orford Sandblasting services on Angi who specialize in any of these tasks

Find Pros for other jobs in OrfordIf your Sandblasting services job is complete, use Angi to find quality Pros in Orford for any number of jobs.