Best toilet pros near Lyons, NE

Flushing the toilet only to realize it’s clogged can cause anxiety. To avoid a clogged toilet, use less toilet paper. If you notice that the toilet is flushing and refilling slower than usual, you can use a plunger to clear clogs in the S-trap. If that doesn’t work, call a plumber to check your system and possibly clear the drain lines.

If you decide to replace the toilet flapper yourself, the only cost will be buying the new flapper for around $5 to $17. You can also hire a plumber or handyperson to take on the job instead, in which case you’ll pay an hourly rate for labor plus the cost of parts. Handypersons charge $50 to $150 per hour, while plumbers cost $45 to $200 per hour. This repair might take less than an hour for your pro, but note that many providers have a minimum rate for a house call. 

Yes, and no. Your shower, toilet, and sink all connect to the same main drain, but the secondary drains going from each fixture to the main drain are usually separate. This isn’t always the case—especially in older homes—but since toilets contain black water and showers, tubs, and sinks have grey water, toilets are more regulated and come at a greater risk of contamination. It’s best to keep these drains separate using individual waste collection for this reason.

You can DIY your toilet flapper replacement if you’re up for a small plumbing project. Turn off the water to the toilet, open the tank lid, remove the chain from the lever, and unhook the flapper. For a new, adjustable flapper, adjust it to the right setting according to your toilet's gallons per flush rating. Hook the flapper in place and install the chain with 1/2 inch of slack.