Get matched with top bathtub restoration pros in Indianola, NE

There are a few signs, both obvious and not so obvious, that it's time to refinish your bathtub. While some of these signs aren't an urgent problem, others could lead to significant damage if left untreated. Signs you should look out for include:

• Rust stains, which signal the tub's enamel or surface sealer is deteriorating 

• Small chips, which can grow into larger chunks and can lead to rusting

• Discoloration, which doesn't lead to a more significant problem but can be unsightly 

• Dirty surfaces, which means that the tub glaze is breaking down and allowing dirt to seep below the coating

No. You should let the caulk completely dry before you expose it to moisture. It’s safest to wait at least a full day before showering where you’ve recently caulked. Showering before caulk is fully dry can lead to a poor seal, meaning water can seep into cracks and cause damage and mold growth. 

If your Corian® countertop begins to appear dull or dirty, or you notice scratches on the surface, you can return it to its original finish while maintaining its look. To do this, repair any scratches with a repair compound and sand the surface after it dries. 

Then, use an orbital sander with either a 100-, 30-, or 15-micron disc and finish with a hand pad (like Scotch-Brite™ 7447 or 7448) or lamb’s wool bonnet and automotive cutting compound for a matte, semi-gloss, or gloss-finish, respectively.

Surprisingly, cleaning an air bath is almost as easy as relaxing in one. Most air baths have a self-cleaning or drying cycle to remove moisture from the inner tubing. This prevents mold and keeps the tub ready for your next soaking session. For deeper cleaning, use mild soap and a soft cloth to wipe the surfaces and periodically clean the air jets as the manufacturer recommends.