Get matched with top drywall pros in Hay Springs, NE

Furring strips, thin strips of wood or metal, are not always required for ceiling drywall installation. If the ceiling surface is even and in good condition, drywall can be directly attached to the ceiling joists using screws. However, furring strips become essential when dealing with irregular surfaces or when additional insulation or soundproofing is needed. They create a level substrate for attaching the drywall. Ultimately, the decision to use furring strips depends on the condition of the existing ceiling and the specific requirements of the project.

You can prevent air leaks and sagging by gluing a drywall ceiling. However, not every drywall job is a good fit for Sheetrock adhesive, and many pros say ceilings are one of those cases. When you place them properly, drywall screws make ceiling Sheetrock part of your home’s structural support system. 

Adding glue won’t increase the strength of the drywall, and it can make it much harder for you to remove and replace damaged drywall. Adhesive can bridge gaps, though, and it can keep temperature-controlled air from escaping or entering through the ceilings, making rooms more energy efficient.

You may not need to use a drywall anchor, depending on what you're hanging and where you're hanging it. If you can nail or screw into a wooden stud, the wood will provide enough support and stability in many cases. If you're hanging something very lightweight, you can use picture hanging strips to hold it in place. 

There are a few easy ways to locate a wall stud without a stud finder. First, try knocking on the wall with your knuckles. Most parts of the wall will sound hollow, but when you tap over a stud, it will sound more solid. Alternatively, since studs are spaced 16 or 24 inches apart, you can measure those distances from a corner of the room, which will always have a stud.