Get matched with top pressure washers in Hay Springs, NE

Always begin by removing large debris, leaves, and branches from your lawn to make room for the rest of your lawn maintenance checklist. Move on to mowing, weeding, and edging in the spaces between your lawn and garden. Lastly, clean off all hardscapes, porches, and patios for a fresh and tidy appearance.

Yes, it’s okay to use a pressure washer to clear and clean your gutters. Be careful to avoid the outside of the gutters, as getting too close with the powerwasher can peel away the paint. Also, be careful to avoid causing any damage to seams that may be in the corners or along the length of the gutter.

You don’t have to pressure wash your deck before painting. However, you must clean the deck, and pressure washing is one of the most efficient methods. Pressure washing quickly removes flaked paint, wood fibers, and embedded dirt. It also gets much deeper into the wood surface than manually scrubbing the deck—and the cleaner the deck, the better the paint can adhere. Ensure the wood is fully dry before applying paint.

This process doesn’t necessarily require soap or detergent, but it definitely helps. You can get by with just using water, but remember, brick requires a lower-than-average pressure level when compared to concrete, so forgoing detergent increases the time it takes to spot clean stains and debris once you finish with the pressure washer. Brick is especially porous, so the less water you use on it, the better.