Get matched with top concrete leveling pros in Bridgeport, NE

Yes, you should seal your exposed aggregate concrete to keep it protected from the elements and reduce the risk of cracking and concrete spalling. You’ll need to invest in the cost of resealing your concrete about every three years to keep it in good condition. Unsealed exposed aggregate concrete is susceptible to water damage, stains, chips, cracks, and abrasion. Sealers are available in various finishes and levels of gloss. Outdoor exposed aggregate concrete should be sealed with a non-yellowing, UV-resistant sealer to preserve the look of the finish.

Decomposed granite and caliche can both harden into a solid surface using a plate compactor. However, due to decomposed granite’s fine particles, it’s not suitable for driveway surfaces. Some homeowners use pea gravel mixed with a gravel-binding resin to bind the loose stones and create a solid surface that won’t shift like loose gravel.

No, you don’t need to wet concrete to cut it, particularly if you are using a dry-cutting blade. However, adding some water can help cut down on concrete dust. If you’re using a wet-cutting blade, then yes, you need a constant stream of water on your cutting piece while you’re cutting. 

Masonry uses units like bricks, cement blocks, and stone with mortar between them. Mortar is generally made of sand and a type of cement. Examples of masonry include the brick or stone on a house, chimney, or freestanding wall. Concrete is a mixture of water, sand, stone aggregate, and other materials, and is poured into forms or moldings. Types of concrete applications include driveways, garage and basement floors, and poured concrete walls in basements and crawl spaces.