Get matched with top drywall pros in Brady, NE

You can prevent air leaks and sagging by gluing a drywall ceiling. However, not every drywall job is a good fit for Sheetrock adhesive, and many pros say ceilings are one of those cases. When you place them properly, drywall screws make ceiling Sheetrock part of your home’s structural support system. 

Adding glue won’t increase the strength of the drywall, and it can make it much harder for you to remove and replace damaged drywall. Adhesive can bridge gaps, though, and it can keep temperature-controlled air from escaping or entering through the ceilings, making rooms more energy efficient.

In framing, studs are placed at 16-inch intervals to coincide with the typical spacing of wall materials such as drywall or plywood. This spacing is called "on-center" and is necessary for maintaining structural stability and efficient use of materials. The 16-inch spacing also helps to distribute the weight evenly across the building's structure. For those looking to cut material costs and improve energy efficiency, 24-inch stud spacing can be employed through a method called "advanced framing". This requires careful planning and adherence to local building codes to ensure structural integrity.

Bump-out additions can add some space to a closet without requiring any significant structural work. This entails pushing back the existing rear or side of the closet, simply moving the wall into either an adjacent room or unused space. For ground-floor closets, this could even be extended to the exterior of the home, but that has its own complications. Bump-outs are a good discussion to have with your contractor if you’re just looking to increase the space a little—not renovate the entire closet space.

Level 4 is the most commonly used drywall finish for visible interior walls. Finishing the drywall to Level 4 rovides a smooth surface ready to be painted with flat paint. 

Level 2 and 3 finishing are also common, particularly on walls that will get covered.