Get matched with top mailbox repairers in Wilton, ND

If you’re dealing with a drawer that’s sticky or askew, learning how to fix drawer slides is relatively simple. Start by removing the drawer from the cabinet and examining the slides for any damage or broken parts. If they appear intact, clean the sides and corresponding tracks with a hot, damp cloth. Lubricate the slides (bar soap works in a pinch) and tighten the screws. Finally, reinsert the drawer, making sure it glides effortlessly along the slides. Test the drawer to ensure it opens and closes smoothly, making any necessary adjustments for proper alignment.

To prevent sagging, consider both the material and the span of the shelf. Using sturdy materials such as plywood or solid wood can provide better support than particleboard. Additionally, limiting the shelf span to 36 inches or less can reduce the risk of sagging. For longer shelves, incorporating center supports or brackets can offer additional reinforcement.

Minor water damage on wood tables can be reversed fairly easily. You can remove stains and light surface damage with a sandblock, then repaint and re-varnish the wood surface. For swollen and rotten wood, you can cut away the damaged parts and use a wood filler as long as the affected area isn’t too much.

If your drawer slides are made of metal or plastic, it’s best to use white lithium grease to lubricate them. The dense formula of that compound creates long-lasting results and should prevent you from having to re-grease the drawer slides frequently. Test the white lithium grease on a small, less-visible area of the slides first to ensure it doesn’t damage the finish before applying to the entire fixture.