Get matched with top sink installation pros in Stanley, ND

Drop-in sinks, also known as top-mount, are the easiest to install, especially when they fit the existing sinkhole. Drop-in sinks sit on top of the counter and have a raised edge to keep water from splashing onto the floor. They come in different styles to match your kitchen design.

There are several types of sink drain stoppers, including pull-out, twist-and-pull, and pop-up. Pull-out sink stoppers can be removed by pulling on the stopper until it comes out of the drain. A twist-and-pull design requires lifting then turning the stopper to lock it in an open position and the opposite action (turning, then pressing down) to close it. A pop-up sink stopper works by pushing down the drain cover to open or close the passageway. 

If you have the patience and help to install a kitchen sink, you can do it yourself. This DIY project works best when replacing a sink that fits the existing hole, and the fittings and plumbing are in good condition. If you're worried about the plumbing's condition or aren't sure how to shut the water and power off to the garbage disposal and dishwasher, it's best left to a sink installation pro.

The best place for a kitchen sink drain is the middle of the sink. Most people prefer center drains because they allow for better water and waste drainage, and the center location limits splashing because water flows straight down the drain hole. If the sink drain is too close to the edge of the sink, water can collect and drain too slowly. It can also be easier to clean sinks when the drain is closer to the center since debris is easier to wash down and doesn’t collect along the sides as easily.