Get matched with top pressure washers in Parshall, ND

If you’re using water pressure above 2,000 PSI, you should wear a full face shield—at 4,000 PSI, a water jet can easily slice through skin. Always wear heavy-duty, waterproof gloves and rubber boots with metatarsal guards. If you’re working with hot water, make sure your gloves are insulated.

Yes, you can pressure wash epoxy garage floors. Most epoxy floors can be cleaned with a mop, but you may choose to pressure wash your floor if it is stained, has ground-in dirt, or is covered with mold or mildew. Before pressure washing, soak stains and dirty areas with a gentle cleanser for best results. Then use a pressure washer tip angled at 45 degrees and raise the spray nozzle to at least 18 inches off the floor to protect the flooring surface. You can also use a surface cleaner power washer or rotary scrubber to prevent overspray. 

Power washing asbestos siding can be hazardous and isn't recommended. The power washer's high pressure can disturb the siding and release harmful asbestos fibers into the air. Rather than attempting to DIY it, hire a professional trained in asbestos handling to tackle any exterior cleaning.

As you can imagine, the difference between soft washing and pressure washing is the amount of pressure applied in the cleaning process. Soft washing is a gentler method that uses a low-pressure nozzle and is safe for fragile paint and masonry. Because it’s not as aggressive as pressure washing, you need to use a cleaning solution when soft washing.