Get matched with top fencing pros in New Rockford, ND

A high-quality wrought iron fence is one of the most durable options available and can last a lifetime, or even centuries, with proper care. However, wrought iron is susceptible to rust and corrosion if not maintained.

To maximize its lifespan, regular maintenance is required. This includes:

• Cleaning the fence with soapy water every six months.

• Scrubbing away any rust or corrosion as soon as it appears.

• Applying a new coat of paint or refinishing the fence every few years to protect the metal from moisture and oxygen. The recommended frequency varies, with sources suggesting anywhere from every 1 to 10 years.

If significant rust develops, it's wise to hire a professional fence repair company to clean the rust and reseal the fence. The cost to refinish a fence is typically between $5 and $12 per square foot, a worthwhile investment to ensure its longevity.

A silt fence should be buried in a trench that is 6 to 12 inches deep. A depth of at least 6 to 8 inches is necessary to prevent water and sediment from running underneath the fence. A deeper trench, up to 12 inches, provides better anchoring during wet and windy weather. To ensure proper installation, look for a red line on the silt fence fabric, which often indicates the correct burial depth. Always adhere to local guidelines and regulations; a professional contractor will be familiar with these requirements.

Since wood is weaker when installed horizontally versus vertically, a horizontal fence is prone to sagging. You can prevent this drooping from happening by building a sturdier fence. Use softwoods that are more stable, such as cedar and redwood, or denser hardwoods for your fence materials. If you can’t afford these pricey materials, use thicker two-by-six pressure-treated pine boards or shorten the span the fence boards have to cover by installing more posts.

Lattice should not touch the ground, as it creates a possibility for rot and a termite infestation. It’s best to leave a gap of 3 or 4 inches at the bottom for airflow and to keep the wood dry. You can add stones, bricks, or other decorative pieces to conceal the bottom of the lattice if desired.