Get matched with top holiday decorators in Lisbon, ND

The length of time shouldn’t matter much if you stick with lightweight Christmas lights and similar decorations. Those shouldn’t pose risks to your stucco. You should avoid attaching anything to your stucco that could fall because it’s too heavy, which may take part of the stucco with it. Some methods, like using double-sided tape or adhesive hooks, will naturally wear out over time and lead to falling lights, so don’t expect to leave these lights up year-round.

If you need to visually inspect your Christmas lights to determine which are good and which need replacement, there are a few things to look for. First, look for discoloration, such as a dark spot or two on the inside of the glass. The spot is an indication of a burnt filament. Also, look for missing filaments, cracked bulb glass, and broken sockets.

The most likely cause of accidentally flashing lights is that a regular bulb has been replaced with a flash bulb by accident. If that’s not the case, you should look for a bulb on the strand that is not quite seated properly and will lose its connection when it’s touched or moved.

In the Christmas days of yore, people braved winter weather to staple or tack their Christmas lights onto their rooftops or nearby surfaces like the fascia boards. Problems quickly emerged with that approach. Damage to the roof, even small marks from staples, provides entryways for moisture and similar issues that can hasten roof rot, wear, and associated leaks. Plus, some homes had tough fiber cement boards or other materials where staples and screws didn’t work.