Top-rated floor cleaners and waxers.

Get matched with top floor cleaners and waxers in Langdon, ND

Enter your zip and get matched with up to 5 pros

Need a pro for your floor cleaning and waxing project in Langdon, ND?

Select your specific project to find the pro for you.

Find Floor cleaners and waxers in Langdon

Floor Cleaning and Waxing questions, answered by experts

Yes, but with caution. A floor grinder is intended to level and polish concrete, so it is a very powerful tool. To remove paint, the floor grinder should be set to 35 square feet per minute or less to minimize the pressure without the use of pocket weights. You might need to go over the surface two times to get any paint that has sunk into the concrete’s pores.

A floor polisher won’t remove scratches from a wood floor, but the polish can fill in surface scratches and make them all but invisible. If you run your fingernail gently over the scratch and it doesn’t catch, chances are that the polish will hide it. If it does catch, you might want to have your floors fully refinished, and you might need to have a professional floor sander in for particularly deep scratches. When in doubt, call a professional floor polisher to determine if polish will fill in your scratches or if you need more in-depth services.

The answer to this question depends on how large the room is and how much experience you have stripping and waxing floors. It will take at least 24 hours to strip the floors, then you must allow time for drying, waxing, waiting for them to cure, and, finally, buffing them. Since you likely will not be working for the full 24 hours, it is safe to say that this is a two- or three-day job.

The best solution for mopping floors depends on the type of floor you have, but a good all-around or multi-purpose DIY floor cleaner is 2 cups of warm water, 5 to 10 drops of liquid dish soap, and 1 tablespoon of lemon juice. This is safe to use on tile, laminate, wood, polished concrete, vinyl, and more, as it’s relatively neutral and lacks caustic and abrasive chemicals that could be harmful to children and pets. You can also use a multi-purpose commercial cleaner, but make sure to follow the directions for safety.

Most experts agree that the best thing with which to clean epoxy floors is a diluted mixture of ammonia and warm water. You can also use mild dish soap diluted with warm water or a degreaser (such as Simple Green or Goof Off) diluted with warm water. Some soap-based cleaners can leave a haze. If you notice this, further dilute the mixture with water or use a different detergent that does not leave a film. You should never use harsh cleaning chemicals, any type of acidic compound (such as vinegar or citrus-based cleansers), or harsh scrubbers like steel wool or hard bristle brushes.

The Langdon, ND homeowners’ guide to floor cleaning and waxing services

From average costs to expert advice, get all the answers you need to get your job done.