Get matched with top pressure washers in Kenmare, ND

While power washing isn't a requirement before you stain a fence, it can make the job much easier and faster while reducing manual labor requirements. The stain will not work if the wood is full of dirt and dust, so power washing, sometimes called pressure washing, is a fast and effective way to prepare the wood for staining. Remember that you need to stain or repaint relatively soon after the wood has dried so that there isn’t time for dust and dirt to build up again. 

It‘s risky to pressure wash indoors, and we wouldn’t recommend it, but following all safety guidelines can prevent the worst outcomes. Always make sure to use an electric-powered machine over one that’s gas-powered, remove obstacles that could cause tripping or falling, and keep appliances like hair dryers and toothbrushes unplugged and out of the way to prevent electrical hazards. 

It’s always best to check the manufacturer’s instructions for your pressure washer to see what detergents they recommend. If you’re caught short and looking for an at-home solution, you could try using trusty dish soap to help keep your siding sparkling. However, always use a dilute solution, as concentrated dish soap can clog the machine. One tablespoon of dish soap per 1.5 quarts of water is a good place to start.

If pressure washers are stored in freezing conditions and aren’t pretreated for such temps, any liquid remaining in the water pump may freeze, expand, and severely damage your machine. While often recommended, emptying the machine with compressed air is a long and tedious process and still may not completely drain the liquid in this pressure washer part. But adding a bit of antifreeze instead will keep it in tip-top shape without the extra effort.