Get matched with top garbage collectors in Gwinner, ND

Most garbage disposals have a reset button that can be triggered with a tool as simple and accessible as your index finger. That said, if you need to perform a more in-depth troubleshooting step, like manually moving the arms inside the unit or rotating the impeller plate, a hex wrench is the most common tool you’ll need. Most garbage disposals come with a hex wrench.

On average, a garbage disposal can last anywhere from 7 to 12 years, with many models functioning well for about 10 years. With heavy usage, a motor may last a minimum of five years, while grinding plates will wear down over time. It's generally a good idea to consider a replacement if your unit is approaching the 10-year mark. Other signs that it's time for a new disposal include frequent leaks, persistent clogs, lingering odors, lack of power, or unusual noises. If your unit is not that old, it's worth investigating if a less expensive part, like a rubber seal or a loose hose, is causing the issue.

While unplugging your garbage disposal and plugging it back in may help, most units have an actual reset button, a bright red switch found on the underside of your unit. If your garbage disposal needs resetting, you may notice this button sticking out about a quarter of an inch from the surface of the unit, with which it’s usually flush. Simply depress this reset button to reset the unit, and then test to ensure it’s working about 10 minutes later.

Once you have your garbage disposal disconnected, you can remove the mounting bracket by unscrewing the bolts that are holding the bracket. You can back them out just enough to pop off the snap ring, which prevents the bottom portion of the bracket from disconnecting from the top when you unscrew the bolts. Use a regular screwdriver to pop off the snap ring, and the rest of the components should fall off by themselves.