Top-rated floor polishers.

Best floor polishers near Grafton, ND

Enter your zip and get matched with up to 5 pros

Need a pro for your floor polishing project in Grafton, ND?

Select your specific project to find the pro for you.

Top-Rated Floor polishers in Grafton - Updated Nov 2026

Floor Polishers FAQs, answered by experts

Before starting on a full refinishing project, determine if your floors need to be completely sanded down to the bare wood or if the damage is shallow and mostly cosmetic. Deep scratches and gouges will require you to rough sand using a drum sander or belt sander, but small surface scratches or floors that have only lost their luster don’t need a complete overhaul. Instead, you can skip the rough sanding step and sand-screen the old finish with a buffer, removing only the top layer of polyurethane.

Regular vacuuming, deep cleaning, and prompt stain removal help maintain appearance and durability.

Depending on flooring type and condition, costs range from $0.25 to $2 per square foot.

Yes, but with caution. A floor grinder is intended to level and polish concrete, so it is a very powerful tool. To remove paint, the floor grinder should be set to 35 square feet per minute or less to minimize the pressure without the use of pocket weights. You might need to go over the surface two times to get any paint that has sunk into the concrete’s pores.

You can mop bamboo floors, but exercise caution to protect the material from excess moisture, which can seep into the bamboo, causing it to warp and well. Moisten a microfiber mop and wring it out until it’s just damp, or use a pH-neutral cleaner, as this will prevent damage to the bamboo fibers. Avoid harsh chemicals, like traditional floor cleaners. After cleaning, wipe the floor dry.

The Grafton, ND homeowners’ guide to floor polishing services

From average costs to expert advice, get all the answers you need to get your job done.