Get matched with top pressure washers in Tyner, NC

The best and fastest way to remove paint from a deck often involves combining a chemical stripper with a pressure washer. Gel-based paint strippers are highly recommended because their thick consistency makes them less messy and easier to apply than liquid strippers. After applying the stripper to loosen the paint, you can use a pressure washer to efficiently wash away the residue. When using a pressure washer for this task, it's important to use a low pressure (under 1000 PSI) to avoid forcing too much moisture into the wood, which could lead to mildew or rot.

You can get more pressure out of your pressure washer by adjusting the pressure control knob clockwise to increase pressure (+). You can also check your nozzle for debris and clogs and remove anything you find with needle nose pliers. Switch to a nozzle with a lower-degree spray angle or a turbo nozzle to achieve more pressure at the tip. Check for leaks in the hose and connections, and make sure your water supply is offering enough pressure. 

Whether you need to winterize your pressure washer depends on where it will be stored. If it's kept in a location where temperatures could drop to freezing, any liquid left in the water pump can freeze, expand, and cause severe damage to the machine. To prevent this, you can add antifreeze to the pump. While emptying the machine with compressed air is an alternative, it can be a tedious process and may not remove all the liquid. If you can store the pressure washer in a relatively warm place with no risk of freezing, you won't need to add antifreeze. However, regardless of storage conditions, it is good practice to empty the gas chamber and refresh the oil before storing it for the winter.

Much like wood siding, it can be dangerous to use a pressure washer on composite siding. While normally durable, composite siding isn’t made to stand up to higher pressure settings. It also makes it very easy to damage the paint or finish on the siding. Some professional power washing companies may take the job on, but we recommend avoiding it, especially as a DIY project with a rented pressure washer.