Top-rated window treatment pros.

Get matched with top window treatment pros in Sims, NC

Enter your zip and get matched with up to 5 pros

Need a pro for your window treatment service project in Sims, NC?

Select your specific project to find the pro for you.

Find Window treatment pros in Sims

M&D Property Solutions
4.5(
23
)
Blinds or Shades - Install or ReplaceBlinds or Shades - Install or Replace - For BusinessBlinds or Shades - Repair+2 more

Serving Sims, NC and surrounding areas

Approved

In business since 2017

Emergency services offered

Warranties offered

"Needed fencing installed to keep groundhogs from taking up residence under our deck. Brady came up with a creative and complete solution that made sure the varmints were out and would not return. Would use again."
Master bedroom
Master bedroom
Front hall
Living area
Entry

+10

Response time1 day
Recommended by100%of homeowners
...
Showing 1-10 of 52
Window Treatments questions, answered by experts

When specifying window sizes, manufacturers use a standard four-digit code system. The first two numbers represent window width, and the last two represent window height. For example, a window with a code of 2917 has dimensions of 2 feet, 9 inches wide by 1 foot, 7 inches high. Windows with even dimensions include zeros as placeholders. For example, a window that is 5 feet wide by 2 feet high would have a code of 5020.

Window capping costs between $1 and $2 per linear foot. Since your average window size is 24 by 36 inches, you’re looking at 10 linear feet in total, or $10 to $20 per window. Labor adds another $30 to $100 per hour to the project. If you have custom windows, you’ll spend more to have your windows capped. Fiberglass tends to cost more than vinyl and aluminum, while vinyl costs the least but has the shortest lifespan and may have a higher long term cost.

Glass block windows offer several unique benefits over traditional windows, and they create a much more unique look. These specialty windows offer added privacy while allowing natural light into the space, which is why they’re a popular choice for bathroom features. They also provide increased security as glass blocks do not open unlike traditional windows. Plus, they provide increased energy efficiency, lowering energy costs and preventing drafts.

The maximum protruding distance allowed for a bay window is determined by its flank angles. 30-degree flanks can extend about 13 to 14 inches. If the angle is 45 degrees or larger, then the bay window can stick out about 19 inches. If the window extends too far out, it would cause structural instability and safety concerns.

No, it’s not normal for windows to rattle in the wind. If they do, it may signal that there’s a larger problem at play. Common reasons that windows rattle in the wind are because the glass isn’t secure enough, the frame is loose, or the wood is rotting. In any of these cases, you should identify the problem and take steps to fix it.

The Sims, NC homeowners’ guide to window treatment services

From average costs to expert advice, get all the answers you need to get your job done.