Get matched with top screen repair technicians in Pinetops, NC

While the benefits of garage door screens usually outweigh the downsides, there are some cons to installing one. First off, they can be quite expensive, especially if you’re having a professional install a retracting screen or a custom size screen. Second, they let fresh air and natural light in, but they also don’t provide the same privacy from people in the neighborhood that a solid door does. As you might guess, screens also won’t insulate your garage, so they’re often not usable in colder weather.

The screen on many screen doors is held in place by screen spline. Screen spline is typically a thin vinyl tubing that fits into the groove of the door’s frame and holds the screen in place. To install the spline on a screen door, you’ll need a spline roller—a tool that presses the spline and screen into the door’s narrow groove. Note that old spline can crack and break, so replacing your screens is a good time to replace the spline, too.

You can add any type of window to a brick house, so long as the window has proper support. Windows with wider openings and windows in brick walls will need a lintel to support the extra weight above the window frame. A lintel is a support beam that distributes the weight from above evenly around the window.

If your door has interchangeable inserts, you’ll likely want to swap the glass out for a screen during the summer months. The process to do so will vary by door, but you’ll follow these general steps: First, use a flathead screwdriver to pop out the retainer strips—the plastic strips running down both long (and sometimes all four) sides of the door. Then gently pull them out by hand. Carefully remove the glass insert from the door and replace it with the screen. Finally, push the plastic retainer strips back into place, working from top to bottom.