Get matched with top closet pros in Pinehurst, NC

"Project was to design and install a closet system for a large reach in closet. Estimator arrived on time, helped to design the closet and provided all the needed information. Installer was excellent and the closet looks beautiful. We are very pleased with all the services. David"

"Tammy and David are wonderful, kind people who are expert in what they do! I met them at a time when I needed a kitchen remodel. My new refrigerator was lonely and needed cabinets around it. I explained what I wanted and, most important to me, they listened! I also had a cabinet that enclosed the old frig...I wanted that one to house my microwave on the upper portion with slide out shelves on the lower. As a matter of fact, I wanted sliding shelves around the new frig too. Later that evening, Tammy sent a computer graphic of the final product after I asked for a change in design...I approved it and they were on their way! Tammy and David had the necessary information and promised two weeks for installation to occur. Exactly two weeks from our first meeting, they began the installation; a day later, it was completed! The cabinets are absolutely beautiful, a testament to their expertise! I am beyond ecstatic every time I see them! Additionally, I should mention that my home is old with floors that do not always demonstrate the word level! They compensated for that in their design; in fact, there was still a slight problem with the refrigerator after the install...it was leaning backwards. I texted them about it. They came over, after some very busy hours of working on another project, to make sure the frig was level. When David said that they weren't leaving until this problem was solved, I knew I had chosen the best people. The problem was corrected and I couldn't be happier. Besides being incredible carpenters, they are good, caring people! They make a great team...I wholeheartedly recommend them! Thank you Tammy and David!"

"Simply outstanding. The office turned around the request in minutes, literally had the handyman available immediately. I couldn’t do it at that time but we scheduled fit the next morning. Kurt arrived promptly at 10a and after a quick discussion got right to work. We made some changes along the way as far as positioning of the tvs. Kurt redid as requested and was ready to get everything done absolutely correct. He was polite and casual, professional and personal. I have found a handyman service for life. K-Plus is the absolute best in the Sandhills."

"Custom cabinets were built as requested, and were excellent quality. TravLock Furniture manufactured and installed Cabinets on schedule and without any issues. After installation I hired TravLock for additional cabinet work which was completed in a timely manner. I would recommend TravLock furniture to anyone seeking cabinet work."

"Needed fencing installed to keep groundhogs from taking up residence under our deck. Brady came up with a creative and complete solution that made sure the varmints were out and would not return. Would use again."

"Remarkable craftsmanship!! They were fantastic"

Cabrera's, is committed to excellence every aspect of our business. We uphold a standard of integrity bound by fairness, honesty and responsibility in all of our jobs. We are a locally owned and operated business with more than 2 years of experience serving Asheboro, NC and surrounding areas. There is no job too big, or too small for our team. Call today and let us put our experience to work for you!\n

About My Business\nI’m a local handyman from Raleigh and have lived in the area most of my life. I take pride in helping homeowners with reliable, quality repairs and improvements. From fence repairs and carpentry to general home maintenance, I focus on doing the job right and treating every home with care and respect.\nYou can expect honest communication, fair pricing, and dependable work from someone who truly cares about the local community.

"We love our new closet!"

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"