Get matched with top sonic cleaning pros in Moyock, NC

You should avoid using a pressure washer on any surface or item that could be damaged by the high-pressure spray, as some materials are too delicate to withstand the force.

Key items and surfaces to avoid include:

• Electrical Components: Never pressure wash electrical systems, as water can cause short-circuits and create a safety hazard. This includes utility meters, breaker boxes, electrical outlets, generators, and HVAC or air conditioner units.

• Delicate and Fragile Materials: Fragile items can crack, shatter, or be stripped by the pressure. Avoid pressure washing windows, glass, light fixtures, shingled roofs (especially asphalt), and stucco.

• Painted, Stained, or Sealed Surfaces: Unless your goal is to strip the finish, do not pressure wash painted surfaces, stained wood (like decks), or anything with a protective seal that could be stripped away. Be especially cautious with older surfaces that may contain lead paint.

• Soft Woods and Certain Decking: Delicate surfaces like softwood, composite decking, and antique or wooden patio furniture can be etched or damaged. If you must wash wood, use a lower-powered pressure washer with a wide-angle nozzle to prevent damage.

• Living Things: Never use a pressure washer on people, pets, or plants. The force can cause serious injury and will destroy landscaping.

While removing every snowflake from your roof is unnecessary, you should remove a significant buildup of snow. Since snow is wet and heavy, it can easily cause damage to your roof, which can lead to needing costly repairs. 

Additionally, when the snow melts but has nowhere to go and refreezes, it can create an ice dam, causing mold concerns due to water leaking into your attic and ceiling. For these reasons, it’s best to hire a snow removal professional to clear heavy snowfall from your roof as soon as possible.

Yes, and they do it exceptionally well. Heated roof cables have two purposes: melting snow and preventing ice buildup. Ice damming happens when ice forms on the roof (usually where the roof meets the gutter) and melts stubbornly slowly, causing moisture to enter the roof itself and, therefore, the home.

If you wish to forego painting your shingles but still want to give them a fresh look, a deep cleaning is the first step. Clean off any debris from your roof and gutters, and then power wash your shingles to get grime and algae off. To take things one step further, you might even consider installing new gutters to give your home a bright new look.