Top-rated contractors.

Get matched with top contractors in Macon, NC

Enter your zip and get matched with up to 5 pros

Need a pro for your contractor service project in Macon, NC?

Select your specific project to find the pro for you.

Find Contractors in Macon

Avatar for Mike's Painting & Pressure Washing
Mike's Painting & Pressure Washing
4.7(
28
)

Serving Macon, NC and surrounding areas

In business since 1996

Emergency services offered

Credit card accepted

"I would highly recommend this business.  We had them come and restain the deck and at first just powerwash the house.  They scheduled the work right away.  After doing the pressure washing, there were some areas with paint chips under the soffit.  Mike offered to repaint those for free.  During this, they noticed areas of the soffit that were rotten, so we had them repair those areas of the wood.  They also fixed a few screens that were damaged during the pressure washing for free.  
Everything turned out great, and we are very happy we had this work done.  Mike and Crystal are very professional and easy to work with.  I will be having them do some more work on our house in the near future.
"
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+161

Recommended by91%of homeowners
Avatar for Wesbo, LLC
Wesbo, LLC
5.0(
4
)

Serving Macon, NC and surrounding areas

In business since 2015

Free estimates

"Excellent! Kevin is a wonderful builder. The entire building experience was efficient with Wesbo. Kevin is very easy to work with and great at communication. We will use him again for a detached garage and a possible pole barn in the future."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+5

Recommended by100%of homeowners
Avatar for Homemade Design
Homemade Design
3.7(
322
)

Serving Macon, NC and surrounding areas

In business since 2006

Credit card accepted

"I feel extremely fortunate to have found Vicki through Angie's List !  She is an extremely talented person who is very easy to deal with. She has a breath of knowledge that allows her to accommodate my tastes, but also ensure that the overall design is in sync with the design and location of my home.  She has  a very diplomatic way of suggesting when I'm going astray with my choices and in every case where she has told me "Trust Me"  I have been delighted ! She is very aggressive in helping me find the best pricing and often times will work with the vendors directly  hence saving me the time.  She also has excellent local contacts.  Everyone I've worked with through Vicki has been timely, professional, and highly competent.
My project is far from complete.  I intend to continue to use Vicki and her expert advice until the end !!!!"
Pennsylvania Master Bathroom
Boston Small Condo Kitchen
California Client Saves with HMD Designer Discounts
Recommended by54%of homeowners
Avatar for Jill Seidner Interior Design
Jill Seidner Interior Design
3.5(
89
)

Serving Macon, NC and surrounding areas

In business since 2006

Credit card accepted

"Once I sent her all the measurements, it took her a little while to get the options back to me.  Overall, they're good designs.  However, they're very simplistic and give general ideas for space planning.  I was hoping to have a better idea for sizes of furniture for the space and some variations on staging.  
Jill was very responsive when I did have a question.  I'm not sure how helpful it is to have a virtual design done.  If we lived in similar cities, I'd probably use her again for help with additional designs.
"
Recommended by55%of homeowners
Avatar for Care & Repair LLC
Care & Repair LLC
4.5(
14
)

Serving Macon, NC and surrounding areas

In business since 1999

Free estimates

"If you want a contractor who will pay attention to problems/defects from previous repairs (or original construction), bring these to your attention and correct the problem, then Cyril is the guy for you.  
Was the final cost higher than the estimate?  Yes, but only because he discovered problems with the original construction to my attention and provided suggestions to resolve.  When you find that the posts that hold up a deck 20+ feet high are sitting on dirt or a scrap of 2x10 with no concrete support, that's something I want to know and fix.  The final cost was reasonable, given the extra work I authorized Cyril to complete in order to ensure the safety of my family and guest.  Cyril always let me know what he had found, including pictures to document (I wasn't on site) and didn't perform extra work without permission.
I think he did a fabulous job.  We are very pleased with the work and the finished result.  
I will definitely use Cyril again.
"
Added supports
Laying new subfloor
Finished floor
Recommended by100%of homeowners
Avatar for Apex Quality Remodeling LLC
Apex Quality Remodeling LLC
5.0(
4
)

Serving Macon, NC and surrounding areas

Free estimates

Credit card accepted

"Fantastic!!! Efficient, friendly, they cleaned up extensively from taking down my popcorn ceiling, removing trim and paneling. They then painted my ceiling in my walls, made my whole room look brand new again. Can’t wait to have them come back in the new year to do some additional rooms in our house."
Painting - Exterior Project
Ceramic Tile Project
Carpentry - Woodworking Project
Ceramic Tile Project
Painting - Exterior Project

+106

Recommended by100%of homeowners
Showing 1-10 of 24
Unfinished Carpentry questions, answered by experts

It’s sometimes safe to replace a load-bearing wall with a beam, but you need a structural engineer to sign off on the project. You’ll also likely have to upgrade to a steel I-beam or another material that’s stronger than wood to maintain the level of support you need without the wall underneath.

Framing with metal studs can be significantly faster than using wooden studs, provided you have some experience working with the material. While you can use virtually instant pneumatic nailers with wood, metal requires installing screws. However, because metal is lighter, straighter, usually comes cut-to-length, and doesn't require sorting for the best pieces, you can save significant time using metal instead of wood.

Your local building code will list all the framing requirements for whatever type of structure you're building. Most exterior walls require spacing of 16 inches on-center, while many non-load-bearing interior walls only require 24 inches of spacing. However, there are also varying requirements depending on your construction material, so checking your municipality's rules is essential.

Converting a carport into a garage can vary in difficulty depending on its configuration, the condition of the foundation or slab, and its location relative to the house. The process has a lot in common with a home addition, but you can often skip non-essential finishes like fine flooring, trim work, or even drywall and HVAC. The conversion requires experience with drywall, insulation, and other building materials to ensure it’s done safely and correctly. While it might be possible for a DIYer with the proper tools and skills to do the work, it is a complicated and potentially dangerous job. If you’re new to basic construction, it's best to leave this project to the professionals.

Most Cape Cod houses are two stories tall at the peak, although they’re considered one-and-a-half stories tall because the steep roof pitch cuts off a portion of the living space on the second story. Unless you raise the roof on your Cape Cod house to add a dormer, the interior rooms upstairs will lose some usable living space to the sloped ceilings.

The Macon, NC homeowners’ guide to contractor services

From average costs to expert advice, get all the answers you need to get your job done.