Top-rated contractors.

Get matched with top contractors in Littleton, NC

Enter your zip and get matched with up to 5 pros

Need a pro for your contractor service project in Littleton, NC?

Select your specific project to find the pro for you.

Find Contractors in Littleton

Avatar for Mike's Painting & Pressure Washing
Mike's Painting & Pressure Washing
4.7(
28
)
Major Home Repairs (General Contractor)

Serving Littleton, NC and surrounding areas

In business since 1996

Emergency services offered

Credit card accepted

"I would highly recommend this business.  We had them come and restain the deck and at first just powerwash the house.  They scheduled the work right away.  After doing the pressure washing, there were some areas with paint chips under the soffit.  Mike offered to repaint those for free.  During this, they noticed areas of the soffit that were rotten, so we had them repair those areas of the wood.  They also fixed a few screens that were damaged during the pressure washing for free.  
Everything turned out great, and we are very happy we had this work done.  Mike and Crystal are very professional and easy to work with.  I will be having them do some more work on our house in the near future.
"
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+161

Recommended by91%of homeowners
Avatar for Wesbo, LLC
Wesbo, LLC
5.0(
4
)
Major Home Repairs (General Contractor)

Serving Littleton, NC and surrounding areas

In business since 2015

Free estimates

"It was an amazing experience. Wonderful company to work with, very happy with all the final touches and finished product. When he said a time for it to be done he stopped to that time and was within the budget that we had agreed to."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+5

Recommended by100%of homeowners
Avatar for Homemade Design
Homemade Design
3.7(
322
)
Major Home Repairs (General Contractor)

Serving Littleton, NC and surrounding areas

In business since 2006

Credit card accepted

"I feel extremely fortunate to have found Vicki through Angie's List !  She is an extremely talented person who is very easy to deal with. She has a breath of knowledge that allows her to accommodate my tastes, but also ensure that the overall design is in sync with the design and location of my home.  She has  a very diplomatic way of suggesting when I'm going astray with my choices and in every case where she has told me "Trust Me"  I have been delighted ! She is very aggressive in helping me find the best pricing and often times will work with the vendors directly  hence saving me the time.  She also has excellent local contacts.  Everyone I've worked with through Vicki has been timely, professional, and highly competent.
My project is far from complete.  I intend to continue to use Vicki and her expert advice until the end !!!!"
Pennsylvania Master Bathroom
Boston Small Condo Kitchen
California Client Saves with HMD Designer Discounts
Recommended by54%of homeowners
Avatar for Jill Seidner Interior Design
Jill Seidner Interior Design
3.5(
89
)
Major Home Repairs (General Contractor)

Serving Littleton, NC and surrounding areas

In business since 2006

Credit card accepted

"Once I sent her all the measurements, it took her a little while to get the options back to me.  Overall, they're good designs.  However, they're very simplistic and give general ideas for space planning.  I was hoping to have a better idea for sizes of furniture for the space and some variations on staging.  
Jill was very responsive when I did have a question.  I'm not sure how helpful it is to have a virtual design done.  If we lived in similar cities, I'd probably use her again for help with additional designs.
"
Recommended by55%of homeowners
Avatar for Care & Repair LLC
Care & Repair LLC
4.5(
14
)
Major Home Repairs (General Contractor)

Serving Littleton, NC and surrounding areas

In business since 1999

Free estimates

"If you want a contractor who will pay attention to problems/defects from previous repairs (or original construction), bring these to your attention and correct the problem, then Cyril is the guy for you.  
Was the final cost higher than the estimate?  Yes, but only because he discovered problems with the original construction to my attention and provided suggestions to resolve.  When you find that the posts that hold up a deck 20+ feet high are sitting on dirt or a scrap of 2x10 with no concrete support, that's something I want to know and fix.  The final cost was reasonable, given the extra work I authorized Cyril to complete in order to ensure the safety of my family and guest.  Cyril always let me know what he had found, including pictures to document (I wasn't on site) and didn't perform extra work without permission.
I think he did a fabulous job.  We are very pleased with the work and the finished result.  
I will definitely use Cyril again.
"
Added supports
Laying new subfloor
Finished floor
Recommended by100%of homeowners
Avatar for Four Seasons Handyman Services LLC
Four Seasons Handyman Services LLC
5.0(
1
)
Major Home Repairs (General Contractor)

Serving Littleton, NC and surrounding areas

Emergency services offered

"Everything went well. He is always on time. This is a big deal for me because I have had a lot of problems getting contractors to show up on time, or at all. Craig can do just about anything you need done. I would recommend him to anyone."
Home Remodeling
Home Remodeling
Home Remodeling
Home Remodeling
Home Remodeling

+20

Recommended by100%of homeowners
Showing 1-10 of 27
Unfinished Carpentry questions, answered by experts

Stick frames, metal frames, or prefabricated concrete frames are included in framing a house, along with creating the framework and space for windows, doors, and entryways. Other aspects of developing a home—like drywall, insulation, windows, doors, and more—are not included in the cost to frame a house.

Most of the time, you’ll want to use screws on your subfloor rather than nails. Nails can actually weaken plywood, whereas screws can easily penetrate without damage. They also form a more secure connection because of their shape, preventing squeaky floors and tightly holding the subfloor in place. That said, some contractors do prefer nails depending on the type of floor covering because they allow for more flexibility.

Joists do distribute their load to beams, but they don’t sit on top of the beams. Instead, home builders nail or screw the joists directly to the beams such that the end of the joist butts up against the edge of the beam. Beams can sit on other beams for support, but you’ll never see a joist sitting on top of a beam or another joist.

In framing, studs are placed at 16-inch intervals to coincide with the typical spacing of wall materials such as drywall or plywood. This spacing is called "on-center" and is necessary for maintaining structural stability and efficient use of materials. The 16-inch spacing also helps to distribute the weight evenly across the building's structure. For those looking to cut material costs and improve energy efficiency, 24-inch stud spacing can be employed through a method called "advanced framing". This requires careful planning and adherence to local building codes to ensure structural integrity.

When deciding whether to use nails or screws for framing, the specific needs of the project must be taken into account. Nails have long been the go-to option for framing due to their affordability, ease of installation, and ability to withstand shear forces. They are perfect for structural framing projects where fast assembly is essential. In contrast, screws offer exceptional holding power and are particularly useful in situations requiring increased strength and resistance to pull-out forces. For projects that prioritize accuracy and long-lasting quality, screws may be the preferred option, though nails remain a dependable and efficient choice.

The Littleton, NC homeowners’ guide to contractor services

From average costs to expert advice, get all the answers you need to get your job done.