Get matched with top driveway gate pros in Kenly, NC

In most cases, you will need a permit to install a new driveway or property gate. An exception might be if you are simply replacing an existing gate. Before issuing a permit, your local municipality may require a site plan or survey to verify property lines and prevent encroachment on a neighbor's property. Permits for a gate typically cost under $100. Be aware that corner properties may have additional restrictions on gate height or style. It's wise to confirm permit requirements with your local building department or your gate installation company, which can usually handle the entire permitting process for you.

Ideally, a gate should be able to swing both in and out. However, if it can only open in one direction, it is generally best for it to swing inward. This is often the safest option, especially for deck gates near steps, as you'll want the gate to swing away from the stairs. An inward swing also prevents the gate from opening into a public space, like a sidewalk, and can be more convenient when carrying heavy items like a wheelbarrow into a garden.

There are exceptions, however. The layout of your property may require a different approach. For example, if your property is on a slope, the gate may not be able to swing inward. You should also ensure the gate can open fully without colliding with any objects or blocking access to other areas. For a backyard garden gate where public access isn't a concern, the direction it swings is largely a matter of personal preference. Finally, always check your local building codes, as they may have specific requirements for which way a gate must swing.

While spring gates close gently but firmly, they’re not a foolproof solution for securing your yard to prevent pets or kids from escaping or unwanted guests from entering. Installing a gate latch that is sturdy and lockable with a self-closing mechanism is more effective, especially when used alongside other methods for keeping your home safe, such as cameras or motion detectors.

A Trex gate costs $750 plus another $200 for the hardware pack necessary for installation. By contrast, Trex fencing ranges in price from $22 to $38 per linear foot, so you may pay a lot or a little depending on just how much space you need to enclose in your yard.