Barrow Construction, LLC has been serving as a leading Construction Company in the Virginia-North Carolina area since it was founded in 1999. Beginning as a small company doing decks, siding, framing, and interior trim, Barrow Construction has grown to provide over 25 residential and commercial services. After over 20 years in the business, Barrow Construction wants to focus on the residential construction sector in the southeastern Virginia/northeastern North Carolina area. Barrow Construction works hand in hand with their clients creating something custom and uniquely yours! Call us today, and let's make your idea a reality.
"I would highly recommend this business. We had them come and restain the deck and at first just powerwash the house. They scheduled the work right away. After doing the pressure washing, there were some areas with paint chips under the soffit. Mike offered to repaint those for free. During this, they noticed areas of the soffit that were rotten, so we had them repair those areas of the wood. They also fixed a few screens that were damaged during the pressure washing for free. Everything turned out great, and we are very happy we had this work done. Mike and Crystal are very professional and easy to work with. I will be having them do some more work on our house in the near future. "
"I never contacted the provider or used this service in anyway. I have to write this review so that the request to write this review stops popping up. The rating is bogus as it is required to be able to submit. "
"Once I sent her all the measurements, it took her a little while to get the options back to me. Overall, they're good designs. However, they're very simplistic and give general ideas for space planning. I was hoping to have a better idea for sizes of furniture for the space and some variations on staging. Jill was very responsive when I did have a question. I'm not sure how helpful it is to have a virtual design done. If we lived in similar cities, I'd probably use her again for help with additional designs. "
"Was very informative on the issues I was having corrected them and was very reasonable. I've used them for several jobs now and will continue to do so."
"In September of this year my wife and I bought a home near Cedar Mountain. We had a few things that we wanted to get done to the house before we moved in. From Florida we researched contractors as well as through friends in our new community. I was not prepared for the casual attitude of many of the workmen I spoke with. Out of all of them, there was only one who showed up and did the work as promised, Mr. Wade Morris. Despite having to drive and extraordinarily long way to our home, Wade arrived every morning at 8:30 until the job was done. I had to return to Florida but I left Wade a key to finish up. When I got back to NC I was pleased to find the house clean and the work done to a high standard of professionalism. Little extras, like painting the bedroom baseboards (which was not part of our agreement) made me appreciate Wade and Gaye all the more.
Bump-out additions can extend anywhere from 2 to 15 feet from an existing room. The right size will depend on how you plan to use the new space. For a cantilever bump-out, which doesn't require additional foundation support, the limit is typically 24 inches (2 feet). If a footing and foundation are part of the project, a bump-out can be much larger, even encompassing a whole room. It's also important to remember that many residential properties have limits on the total house size relative to the lot size.
Baseboards don’t have to be nailed into studs. However, nailing them into studs adds to their stability. When studs aren’t available, you can secure them with drywall nails directly into the drywall and adhesive. Always aim to nail into studs, especially in high-traffic or impact-prone areas.
Installing a tongue-and-groove wall requires similar techniques to those associated with installing shiplap. However, because of the precision necessary to make each board fit perfectly and the increased material prices, the cost is higher than that of shiplap installations. Expect to spend between $2 and $6 more per square foot for tongue-and-groove walls versus shiplap ones.
Yes, you will need a jack for a rim joist replacement. To prevent sagging and facilitate the removal of load-bearing wood, you’ll need to relieve the pressure from this joint before beginning work.
Due to hydraulics and other specialized equipment, a sill plate and rim joist replacement are not typically a DIY project. Hiring a professional structural engineer and experienced contractors is the best approach to replacing rotted sill plates and rim joists.
When deciding if you should use 2x6 or 2x8 deck joists, consider the size of the deck, joist spacing, and materials. Larger decks, larger-spaced joists, and weaker wood all require more support, meaning they need larger joists. For example, 2x8 redwood joists spaced 16 inches apart can only safely span up to 10 feet and 7 inches. On the other hand, 2x10 southern pine joists spaced 12 inches apart can be as big as 16 feet and 2 inches. If you aren’t sure what size joist is best for your project, speak with your deck builder.
The Engelhard, NC homeowners’ guide to contractor services
From average costs to expert advice, get all the answers you need to get your job done.
Need to run electricity to your basement? Learn about the cost to install an outlet in an unfinished basement and what factors affect your project cost.
When you’re tackling a project or hiring a contractor, it’s helpful to know key carpentry terms. From end grain to dovetail joints, here’s a complete list.
House framing is one of the first parts of building a home. To do this, you’ll want to hire a rough or unfinished carpenter. Using this guide, you’ll know what questions to ask and where to look for your house framing contractor.
Buying unfinished cabinets can help you create the custom remodel of your dreams, but is it worth the fuss? This guide will tell you everything you need to know.