Get matched with top drain cleaners in Cramerton, NC

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

If your drain line is clogged, your AC might stop cooling, shut down, or refuse to turn on at all. Otherwise, you might see your AC leaking water, find standing water or water damage near the unit, or notice a musty smell coming out of your air conditioner or vents.

Yes, you can pour water down the toilet to help it flush. For each flush, you’ll need 1 to 2 gallons of water for newer toilets or 3 to 5 gallons of water for older toilets. Rather than dumping the entire bucket in all at once, pour the water in slowly for the best results. If you’re pouring water down the toilet to help it flush after a clog, only use 1 gallon of hot water.

If you have a sink stopper, it can feel more challenging to clean the drain without removing it, but here are a few simple steps:

• Pour ½ cup baking soda into the drain using a funnel

• Pour 1 ½ cups vinegar into the drain

• Close the sink stopper for 15–20 minutes

• Open the drain

• Pour 2 cups of boiling water down the drain (be cautious as boiling water can damage some types of pipes)

If the drain isn’t unclogged, repeat the process.