Get matched with top epoxy flooring pros in Clemmons, NC

The actual moisture level that is acceptable for your concrete floor depends on what primer or flooring material you plan to install above it. For this reason, you should check the manufacturer’s instructions for the exact details.

Generally, the moisture levels should be 3.5% to 4.5%, although it does vary. Some products can handle higher levels of moisture, so you should always test your concrete before purchasing your flooring materials.

To preserve a concrete coating, routine maintenance should include regular sweeping and cleaning to remove debris and dirt, promptly addressing any spills to prevent staining, and applying a sealer as the manufacturer recommends. Inspect the surface periodically for any signs of wear or damage to ensure timely repairs and maintain the coating's protective qualities.

Resurfacing a garage floor takes about eight hours on average, with another couple hours over three days to do the epoxy. Epoxy goes on in three coats, with each coat taking 24 hours to dry and cure. You’ll need to keep foot and vehicle traffic off of your garage floor for around 4 days in total when replacing your garage floor, so be sure to plan ahead before you start. This is a great time to organize your garage since you’ll need to move everything out to apply the epoxy.

As with anything you buy, be wary of prices that seem too good to be true. Some low-cost flooring products can contain chemicals that release harmful VOCs (volatile organic compounds) in the form of fumes that can be inhaled or dust that can cause skin conditions.

Even good-quality products can be dangerous for DIY-ers who don’t take proper precautions. Always carefully read manufacturer instructions and wear the recommended protective gear when working with paints and other chemicals. You can also hire a local garage flooring pro with the experience and equipment needed to perform the installation safely with no lingering fumes or debris.