Get matched with top door pros in Bunnlevel, NC

Fire doors are more expensive than your run-of-the-mill residential composite door because of additional materials and expanding sealants that help the door slow down or even prevent the spread of temperatures over 1,000 degrees. If you have homeowners insurance, talk to your company and see if installing fire doors can lower your premiums, especially if you can install steel doors.

Fire doors are constructed to have certain resistance levels regarding fire. A traditional door can typically resist fire for less than one minute, whereas fire doors can resist it for 30 to 120 minutes, depending on the fire door rating. Fire doors give you and your family a better chance of safely escaping during a fire than standard doors. 

Most modern, standard doors are 1 ⅜-inches thick, so you should aim for this thickness unless you're building a door to replace an antique door or fit into a non-standard wall opening. Thickness varies when installing a pocket door or sliding barn door, so a good rule of thumb is to measure your existing door, if possible. For standard doors, you can also measure from the inside of the door to the door stop to gauge the proper thickness.

Ideally, a gate should be able to swing both in and out. However, if it can only open in one direction, it is generally best for it to swing inward. This is often the safest option, especially for deck gates near steps, as you'll want the gate to swing away from the stairs. An inward swing also prevents the gate from opening into a public space, like a sidewalk, and can be more convenient when carrying heavy items like a wheelbarrow into a garden.

There are exceptions, however. The layout of your property may require a different approach. For example, if your property is on a slope, the gate may not be able to swing inward. You should also ensure the gate can open fully without colliding with any objects or blocking access to other areas. For a backyard garden gate where public access isn't a concern, the direction it swings is largely a matter of personal preference. Finally, always check your local building codes, as they may have specific requirements for which way a gate must swing.