Get matched with top door pros in Godwin, NC

The proper height for a gate latch is between 34 and 48 inches above the ground. This height will not only be comfortable for you and your family to use, but it’ll also ensure that your latch complies with the International Building Code.

Sometimes one-way latches are installed very high on the gate to make it easier to open, although it’s only easier for tall people. Installing a two-way latch at the proper height is a good idea.

A slab door is a standalone door without a frame or hardware. A prehung door is a complete set that includes the door, frame, hinges, and sometimes the doorknob and lockset.

In most cases, a prehung door is the better and easier option to install, especially for DIY projects or exterior applications, as they often come pre-weatherproofed. They require fewer tools and less experience to install properly. Although prehung doors are heavier and have a higher upfront cost, the investment is often worthwhile for a complete upgrade that includes a new frame.

A slab door may be a better choice if you are on a tight budget, have a custom-sized wall opening, or only need to replace the door while keeping the existing frame. While the initial cost is lower, you will need to purchase all the hardware separately and do more DIY work to hang it, which may not result in significant time or money savings.

Ideally, a gate should be able to swing both in and out. However, if it can only open in one direction, it is generally best for it to swing inward. This is often the safest option, especially for deck gates near steps, as you'll want the gate to swing away from the stairs. An inward swing also prevents the gate from opening into a public space, like a sidewalk, and can be more convenient when carrying heavy items like a wheelbarrow into a garden.

There are exceptions, however. The layout of your property may require a different approach. For example, if your property is on a slope, the gate may not be able to swing inward. You should also ensure the gate can open fully without colliding with any objects or blocking access to other areas. For a backyard garden gate where public access isn't a concern, the direction it swings is largely a matter of personal preference. Finally, always check your local building codes, as they may have specific requirements for which way a gate must swing.

Kick plates can absolutely be installed on metal doors. Many kick plates for metal doors are magnetic to avoid needing to drill into the metal, but many door manufacturers make kick plates that can be traditionally installed on metal doors using screws. Consult the manufacturer’s instructions to see which is recommended for your door model.