Get matched with top brush chipping pros in Aberdeen, NC

While a rented dumpster can handle a wide variety of materials, there are significant restrictions on what is allowed. Generally, you can dispose of most non-hazardous household junk, yard waste, and construction debris.

Accepted items typically include:

• Furniture, carpets, old linens, and toys

• Wood and yard debris

• Small appliances and excess trash

• Renovation waste like old finishes, building debris, and roofing materials (unless they contain lead paint or asbestos)

However, you cannot put toxic, flammable, or hazardous materials in a dumpster. Prohibited items almost always include:

• Paint, gasoline, oil, and other fuels

• Household cleaners and other chemicals

• Electronics, batteries, and tires

• Refrigerators, hot water tanks, and medical waste

Since regulations can vary by location and company, it is essential to check with your dumpster rental provider for their specific list of accepted and prohibited items before you begin.

A thorn bush isn’t likely to do serious damage, but it’ll definitely hurt if you get a thorn or two in your hand or arm. When removing thorn bushes, always wear thick gloves, long sleeves, and safety goggles to protect against thorns and dirt. If dealing with larger bushes or unfamiliar terrain, consider enlisting a helper for assistance.

Using a truck to remove a bush falls into the category of “just because you can, doesn’t mean you should.” While it is possible to use a truck to pull out a bush, if you don’t have the right equipment, if you’re not familiar with attaching things to your vehicle correctly, or if you don’t have enough room, it’s a risky option. To prevent damage to your vehicle, it’s worth using tools made for the job of digging and cutting roots instead.

Clearing 1 acre of land takes anywhere from two to 12 hours for a professional team, depending on what they’re removing. The amount of time needed to complete the project depends on the size of your acreage, the land’s condition, the size of the crew completing the work, and what type of equipment they’re using. Smaller projects normally take a few hours, while larger projects may require one or two full workdays.