"MDK did a fantastic job! Because building professionals from all fields are extremely busy in Montana during the summer high volume construction months, it's difficult to find specialized contractors. I was able to get three separate proposals but would have had to wait for two months for two of the professionals to get a job started. Tony at MDK really pulled a rabbit out of the hat. Between jobs in Dillon, Butte and Big Sky, Tony put in a week of long days and nights to completely prep, finish, speckle and overcoat my 600 sq ft garage. Because of his work ethic, punctuality and professionalism, I asked him to add a two foot spray guard around the inside perimeter of the garage to match the floor finish. I plan to over-finish the patios and walkways in the future to prevent cracking and expedite snow removal."
If you dream it, we can build it. What's the biggest difference between us and them? We build to last! We offer a full line of Green and Energy Star Certified products, backed by our labor and manufacturer's lifetime transferable warranties. Credit Cards Welcome Financing Available OAC.
When you’re painting a garage floor, it’s best to use a combination of rollers and brushes. You’ll want to start with a brush, making a border around the edges where the floor meets the wall. From there you can use a roller, though some people also like to do the entire first coat with a brush because it’s easier to work the paint into the textured concrete.
Yes. Paint will protect your garage floors, making them more resistant to water, mold, mildew, and oil stains. Depending on your paint choice, painted surfaces are easier to clean and maintain.
Yes, you can seal old concrete, but proper preparation is essential. Before sealing, ensure the concrete is clean, dry, and free of any old sealant. To check if resealing is necessary, place a few drops of water on the surface; if they are absorbed in less than five minutes, it's time to reseal. If you are using the same type of sealer that was previously applied, you may not need to remove the old layer. However, if you are applying a different type of sealer, the existing one must be removed. Additionally, repair or fill any cracks to create a smooth base before you begin sealing.
The cost to replace a driveway coating ranges from $275 to $850, or $550 on average. Naturally, larger driveways cost more than smaller driveways. The type of driveway sealant and the number of coats also impact the cost. Coal tar sealant costs the least, while latex acrylic sealant costs the most. Oil-based sealants fall in the middle.
If your garage floor is heavily soiled or stained, then it’s a good idea to powerwash it with a concrete cleaner before sealing. This process will remove dirt and debris to help the new sealer bond to the concrete properly, and it will also improve the look of your sealed garage floor. After power washing your floor, make sure you let the concrete dry completely before applying sealant, usually for 24 to 48 hours.
The Terry, MT homeowners’ guide to epoxy flooring services
From average costs to expert advice, get all the answers you need to get your job done.
This guide breaks down the cost of installing epoxy flooring in your garage, basement, or other space. Costs depend on resin type, floor size, and more.
Epoxy flooring adds shine and durability to your basement, studio, or garage floor. Check out these epoxy flooring ideas to create the room of your dreams.
