Best pool and spa technicians near Kalispell, MT

Most hot tub motors can last between five and 10 years; however, hot tub motors can burn out sooner if the hot tub water is not maintained or if the motors themselves are not maintained or protected from the elements. Since hot tub motors (also referred to as spa pumps) power the jets and circulate the water, they are important for the functioning of your spa. Buying a quality motor, keeping the hot tub filter clean, and keeping the wet end of the motor wet and the dry end dry can help them last longer.

Yes, you can use silicone or epoxy hot tub repair kits to repair cracks in a hot tub. Always read the manual to see what the manufacturer recommends before attempting to repair a hot tub.

For a fully-foamed hot tub, freezing typically occurs when the temperature drops below 28 degrees Fahrenheit and remains at or below this level continuously for a minimum of 36 hours. If your hot tub and pumps are still operational, however, the water circulates, and this continuous movement helps prevent freezing, even in very cold conditions. This circulation, along with the insulation provided by the foam, helps maintain the water temperature and prevent it from freezing during extended cold periods. Still, if you’re not planning to run it regularly, be sure to winterize the hot tub properly to prevent damage from freezing.

You’ll know you need to replace the pump in your hot tub if you hear loud or unusual noises when the machine is running or notice a significant decrease in water pressure. A leak or altogether failure of the hot tub may also indicate a problem with the pump, but you’ll need a professional to investigate the source of the issue.