Get matched with top asphalt driveway pros in East Glacier Park, MT

An asphalt driveway should be at least 3 inches thick over a compacted gravel base. Areas with poor drainage should have a thicker stone base. To install a new asphalt driveway over an existing driveway, the new asphalt should be at least 2 inches thick and the existing driveway should be in relatively good condition.

Asphalt and tarmac are not the same thing. Traditional tarmac, short for tarmacadam, uses tar as a binder to hold crushed stone together. Asphalt uses bitumen—a byproduct of crude oil—to bind aggregate. Though tarmac was once a go-to for roads, asphalt has become the modern standard. And these days, most surfaces referred to as “tarmac” are actually asphalt. So, while the names may overlap, the key distinction lies in the binder—tar for tarmac and bitumen for asphalt.

Chip seal layers gravel and a liquid bitumen one at a time on-site, while asphalt directly pours a pre-combined mixture. Asphalt must be sealed, but it will last up to four times as long as chip seal driveways. Aesthetically, chip seal has a natural, rustic look compared to the traditional asphalt slab.

Gravel driveways last the longest. With proper installation and routine maintenance, they can last upwards of 100 years. To make sure they last as long as possible, gravel driveways should be properly graded and leveled during installation and repair. The natural material is extremely durable, but the grooves make it challenging to remove snow and easy for weeds to grow through the cracks. Still, this is nothing an afternoon DIY project can’t fix and lends to the fact that their easy maintenance helps gravel driveways last even longer.