Get matched with top bathtub restoration pros in Chester, MT

Most homeowners need to wait at least two days, sometimes three, to use their bathtub following the reglazing process. That’s the normal length of time it takes for epoxy resin to cure. There are quick-dry epoxy kits available that cure in 12 hours, though. To ensure that the epoxy dries properly, try to ventilate the bathroom as well as you can.

If your Corian® countertop begins to appear dull or dirty, or you notice scratches on the surface, you can return it to its original finish while maintaining its look. To do this, repair any scratches with a repair compound and sand the surface after it dries. 

Then, use an orbital sander with either a 100-, 30-, or 15-micron disc and finish with a hand pad (like Scotch-Brite™ 7447 or 7448) or lamb’s wool bonnet and automotive cutting compound for a matte, semi-gloss, or gloss-finish, respectively.

Reglazing a bathtub is worth it if your current tub is in good condition and needs to be refinished or reglazed to bring it back to its shiny, smooth glory. While battered bathtubs might need to be refinished, bathtub refinishing is worth it, too, because it can make tubs with surface imperfections, shallow cracks and scratches, and staining look like new. Reglazing a bathtub is less expensive than refinishing, and both are less than the cost of bathtub replacement.

A chipped bathtub could leak over time if you don’t take care of the issue. A tiny chip isn’t a big deal but may eventually grow into a larger crack. As the months go by, the tub’s barrier against moisture becomes weakened, making it prone to leaking. Large chips can also cause the tub to rust and even crack in half.