The biggest sign that your flange leaks is if you notice water at the base of the toilet. The cause is likely due to a poor flange installation, so you might have issues with loose bolts, an uneven flange, or a cracked plastic flange. Add a deteriorating wax seal to this, and you have a recipe for disaster. The best solution is to shut off the water valve, replace the toilet flange, and seal it with a new wax ring.

Local plumbing codes and manufacturer recommendations typically dictate the minimum distance between a sink and a dishwasher. This is generally 18 to 24 inches, providing enough room for easy loading and unloading of dishes without hindering the sink's function. Maintaining this separation not only adds convenience but also reduces the chances of water damage and optimizes plumbing connections.

While unplugging your garbage disposal and plugging it back in may help, most units have an actual reset button, a bright red switch found on the underside of your unit. If your garbage disposal needs resetting, you may notice this button sticking out about a quarter of an inch from the surface of the unit, with which it’s usually flush. Simply depress this reset button to reset the unit, and then test to ensure it’s working about 10 minutes later.

The cost varies from $200 to $1,500, depending on whether it’s a basic replacement, repair, or a full sink and plumbing upgrade.