Top-rated deck maintenance specialists.

Get matched with top deck maintenance specialists in Wiggins, MS

Enter your zip and get matched with up to 5 pros

Need a pro for your deck maintenance project in Wiggins, MS?

Select your specific project to find the pro for you.

Find Deck maintenance specialists in Wiggins

Avatar for Kossman Construction
Kossman Construction
5.0(
10
)

Serving Wiggins, MS and surrounding areas

Approved

In business since 2019

Free estimates

Emergency services offered

"Hired him to build a deck to support a hot tub. The deck was done under the estimated time and for the right price. He was very professional and agreeable and efficient. Zero complaints. Already got him coming back for another job soon."
Pergola
Deck
Pergola
Before Deck
Pergola Clear Roof

+26

Response time8 hrs
Recommended by88%of homeowners
...
Showing 1-10 of 60
Deck Maintenance questions, answered by experts

It depends on the type of wood. The average cost to build a deck out of pressure-treated lumber is $15 to $25 per square foot, but more affordable varieties such as bamboo and cedar cost less at around $3 to $10 per square foot. However, when comparing the cost of vinyl decking versus wood decking, it’s important to also consider ongoing maintenance costs. For example, most woods require regular sealing to keep them protected against weather and rot.

Yes, it is generally safe to have a fire pit on a deck, but you must adhere to building codes and take several safety precautions. For both built-in and freestanding models, you must use a heat-resistant barrier, such as a fire pit pad or heat shield, between the pit and the deck. Additionally, consider the weight of the fire pit and ensure your deck can structurally support it, reinforcing it if necessary. The fire pit must also be positioned a safe distance from your house, particularly from materials like vinyl siding, to prevent heat damage.

When installing deck boards, screws are generally a better option than nails. Screws offer superior holding strength over time, keeping the boards securely in place. In contrast, nails are more likely to pop out, which can create a tripping hazard. While you can use either, we recommend using 3-inch galvanized deck screws. To minimize the risk of cracking the wood, it's a good practice to drill small pilot holes before driving the screws into the deck joists.

No, you don’t need a permit to repair and replace a few boards on an existing deck. However, if you’re making structural changes to the deck or tearing down the old one and building a new one, you will likely need a permit. Check with your local municipality for the regulations and rules in your area, or ask a local contractor who builds decks for advice.

To flatten a cupped deck board, start by ensuring it’s dry. Then, try flipping the board over so the cupped side faces down and reattach it. If that’s not possible, you can use screws to pull it tighter to the joists or plane the edges slightly to reduce the cup. It’s best to replace severely cupped boards.

The Wiggins, MS homeowners’ guide to deck maintenance services

From average costs to expert advice, get all the answers you need to get your job done.

What do you need done? We’ll find top pros.
  • 🌱 "Mow a small front yard"
  • 🛠 "Fix a leaking pipe under the sink"
  • 🏠 "Repair shingles on an asphalt roof"