Get matched with top masons in Walnut, MS

Q: Can you cut patio stones with a circular saw?

• <div><p>Yes, you can cut patio stones with a circular saw. Similar to using an electric grinder, you will need to use a diamond blade as this is the most effective blade for cutting a material like stone. The stone must be wet when using a circular saw to ensure the cut is smooth.</p></div>

Q: How do you get soot off chimney bricks?

• <div><p>Depending on the amount of soot present, you can vacuum some of it using a brush attachment on your vacuum cleaner. Then, remove the leftovers with a mild cleaner, such as dish soap or vinegar mixed with water. Before applying a cleaning solution, saturate the bricks with clean water to prevent the cleaner from penetrating beyond the surface and causing structural damage to the bricks.</p></div>

Q: What are the alternatives to a stone house?

• <div><p>Brick is the closest choice when seeking to capture the timeless look of stone with a more practical and budget-friendly option. When comparing <a href="https://www.angi.com/articles/stone-vs-brick-siding.htm">stone versus brick siding</a>, the price range of <b>$200,000 to $400,000</b> for average brick home construction is dramatically lower compared to the cost of building a stone home. If you'd like to keep the stone aesthetic without the cost, stone veneer and manufactured stone are both less expensive than real stone. </p></div>

Q: Can you repoint over old mortar?

• <div><p>You will repoint over a fraction of the old mortar, but you should scrape away 1/2 to 1 inch of mortar from the joints before repointing. Otherwise, the repointing is only masking the weakened mortar instead of actually replacing it, which could put your chimney at risk of bigger, more expensive damages later on.</p></div>

Q: What type of drill is best for brick?

• <div><p>The best tool for drilling into brick or mortar is a rotary hammer drill which is a large hammer drill with low rotation speed and high torque. Regular drills with a hammer function are also excellent tools for drilling into brick when the diameter of the hole is 1/2 inch or less. It might be possible to drill into brick with a standard drill if you&rsquo;re only drilling a very small hole, but note that masonry work will put a lot of wear on a standard drill, and the tool may not be strong enough to get through brick.</p></div>

Enter your zip and get matched with up to 5 pros

Find Masons in Walnut

AccuLevel, Inc. - Missouri

4.0(

215

)

Foundation, Basement or Crawlspace - Waterproofing / EncapsulationConcrete Foundation - RaiseConcrete Foundation - Repair

Serving Walnut, MS and surrounding areas

Approved

In business since 1996

Free estimates

Warranties offered

"They explained everything very well, and they fixed the foundation without ripping out my front porch. They have awesome payment plans as well!"

+28

Response time7 hrs

405 neighbors recently requested a quote

Recommended by87%of homeowners

Concrete Foundation - RaiseFoundation, Basement or Crawlspace - Waterproofing / EncapsulationFoundation Drainage - Install or Replace+3 more

Serving Walnut, MS and surrounding areas

Approved (Corporate)

In business since 2025

Free estimates

Warranties offered

"Brandon and Matt did a fantastic job repairing and leveling several cracks in the sidewalk in front of my business. They were prompt, professional, and thorough. I couldn?t be more pleased. I highly recommend Groundworks and would definitely use them again."

+16

197 neighbors recently requested a quote

Request Quote

Olshan Foundation Repair

4.2(

)

Concrete Foundation - RepairConcrete Foundation - Raise

Serving Walnut, MS and surrounding areas

Approved

In business since 1933

Free estimates

Warranties offered

"The seller refused to give concessions for the repairs so we backed out of the purchase. Olshan professionals performed a very thorough inspection and assessment. They are extremely knowledgeable. I would highly recommend their services."

+43

Response time7 hrs

Response rate100%

3 neighbors recently requested a quote

Foundation, Basement or Crawlspace - Waterproofing / EncapsulationConcrete Foundation - RepairBrick, Stone or Block Wall - Repair+2 more

Serving Walnut, MS and surrounding areas

Approved

In business since 2020

Free estimates

Emergency services offered

At Mr. Foundation, also known as DFX Foundation & Waterproofing Experts, we don't just repair homes; we restore peace of mind. Operating across various markets in Arkansas, Mississippi, and Tennessee, our company was founded on the principle that expertise and ethics come first. Unlike typical businesses led by sales targets, our roots are firmly planted in engineering excellence and a commitment to genuine solutions.\n\nOur team specializes in a comprehensive range of services, including professional foundation repair, basement waterproofing, crawl space repair and encapsulation, as well as concrete repair and lifting. But what truly sets us apart is our approach. We see each home as a unique project and each client as a valued partner.\n

24 neighbors recently requested a quote

Basement Drainage Channels - RepairBrick, Stone or Block Wall - RepairConcrete Foundation - Raise+2 more

Serving Walnut, MS and surrounding areas

Approved

In business since 2020

Free estimates

Emergency services offered

"Wonderful company and delivered beautifully."

Response time1 day

Response rate86%

Recommended by100%of homeowners

Request Quote

Valenzuela Masonry & Stone LLC

New to Angi

Brick or Stone - Tuck-pointingBrick and Stone Flatwork - RepairBrick, Stone or Block Wall - Repair

Serving Walnut, MS and surrounding areas

Approved

In business since 2016

Free estimates

Offers commercial services

We are committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests, and make their concerns the basis of our business.\n

2 neighbors recently requested a quote

Basement Drainage Channels - InstallBasement Drainage Channels - RepairConcrete Foundation - Raise+3 more

Serving Walnut, MS and surrounding areas

In business since 2007

Free estimates

Emergency services offered

"The Redeemers Group construction team was on time, pleasant, worked hard, and completed the project a day earlier than promised. The Foundation repair was well done. The encapsulation made the crawl space clean, dehumidified, and safe. We were impressed by the company's professionalism and attention to detail."

+14

Recommended by91%of homeowners

Brick and Stone Flatwork - RepairBrick or Stone - Tuck-pointingBrick, Stone or Block Wall - Repair

Serving Walnut, MS and surrounding areas

In business since 2007

Free estimates

JS Masonry has successfully been in the concrete/Masonry business for well over thirteen years consecutively. My specialty is residential anything and everything to do with Masonry projects. I stay very reputable in the area and looking to maintain and grow my clientele. We are dedicated and looking to work with each and everyone of you.\n\nDon't hesitate contact your local business professional masonry company today!

Recommended by100%of homeowners

Concrete Foundation - Install

Serving Walnut, MS and surrounding areas

In business since 2024

Credit card accepted

"Noah is a very professional young man that has a great understanding on how to perfect a existing mechanical operation. We have also used him to design new electrical conveyors & sorters for the packing operation. lots of talent with this guy! Give him a shout."

Recommended by100%of homeowners

Basement Drainage Channels - InstallBasement Drainage Channels - RepairBrick or Stone - Tuck-pointing+7 more

Serving Walnut, MS and surrounding areas

In business since 1993

Emergency services offered

Credit card accepted

"They did a good job. I have an electric fireplace."

Recommended by78%of homeowners

Request Quote

...

Showing 1-10 of 64

Masonry questions, answered by experts

Yes, you can cut patio stones with a circular saw. Similar to using an electric grinder, you will need to use a diamond blade as this is the most effective blade for cutting a material like stone. The stone must be wet when using a circular saw to ensure the cut is smooth.

Depending on the amount of soot present, you can vacuum some of it using a brush attachment on your vacuum cleaner. Then, remove the leftovers with a mild cleaner, such as dish soap or vinegar mixed with water. Before applying a cleaning solution, saturate the bricks with clean water to prevent the cleaner from penetrating beyond the surface and causing structural damage to the bricks.

Brick is the closest choice when seeking to capture the timeless look of stone with a more practical and budget-friendly option. When comparing stone versus brick siding, the price range of $200,000 to $400,000 for average brick home construction is dramatically lower compared to the cost of building a stone home. If you'd like to keep the stone aesthetic without the cost, stone veneer and manufactured stone are both less expensive than real stone.

You will repoint over a fraction of the old mortar, but you should scrape away 1/2 to 1 inch of mortar from the joints before repointing. Otherwise, the repointing is only masking the weakened mortar instead of actually replacing it, which could put your chimney at risk of bigger, more expensive damages later on.

The best tool for drilling into brick or mortar is a rotary hammer drill which is a large hammer drill with low rotation speed and high torque. Regular drills with a hammer function are also excellent tools for drilling into brick when the diameter of the hole is 1/2 inch or less. It might be possible to drill into brick with a standard drill if you’re only drilling a very small hole, but note that masonry work will put a lot of wear on a standard drill, and the tool may not be strong enough to get through brick.

The Walnut, MS homeowners’ guide to masonry services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Timothy Moore
•
Jul 10, 2026Jul 10, 2026
How Much Does Door or Window Lintel Replacement Cost? [2026 Data]
Door or window lintel replacement costs $400 on average, but there are ways you can save. On the other hand, complicated work will increase costs considerably.
Deane Biermeier
•
May 30, 2026May 30, 2026
How Much Does Brick Wall Repair Cost? [2026 Data]
This guide features information on the costs to repair a brick wall, whether or not you need a brick mason to complete spalling, tuckpointing, or a full restoration.
Rachel Hoffman
•
Aug 3, 2026Aug 3, 2026
How Much Does Repointing Brick Cost? [2026 Data]
Need to repoint brick in your home to make your home look fresh and new? Use this guide to repointing brick cost to price out your project before starting.
Xiao Faria daCunha
•
Jul 8, 2026Jul 8, 2026
What Is Masonry? Definition, Contractor Credentials, and More
If you're considering building a home with brick or stone, you need to know what is masonry? Learn the answer to ensure the finest quality.
Heather Ayer
•
Jul 31, 2026Jul 31, 2026
Your Guide to Common Masonry Materials
Discover the wide variety of masonry materials for your next home upgrade project. Our guide covers the different types of materials to choose from and more.
Dan Simms
•
Jul 9, 2026Jul 9, 2026
Masonry vs. Concrete: What’s the Difference?
When it comes to masonry versus concrete, it can be easy to confuse the two. Use this guide to learn about the differences in appearance, strength, and more.