Top-rated water heater pros.

Get matched with top water heater pros in Sidon, MS

Enter your zip and get matched with up to 5 pros

Need a pro for your water heater service project in Sidon, MS?

Select your specific project to find the pro for you.

Find Water heater pros in Sidon

Avatar for American Home Shield – Home Warranty
American Home Shield – Home Warranty
3.5(
5,688
)
Solar Water Heater System - InstallTankless Water Heater - InstallTankless Water Heater - Install - For Business+6 more

Serving Sidon, MS and surrounding areas

In business since 1971

Credit card accepted

"We pay yearly but we have this is included with our rental property. They are pretty good on most things. We had a hot water heater replaced and they did an excellent job on that. They are very quick on their response. They dont come out here. It is all done on the internet.  I just like the idea that one time service charge is so much better than trying to hiring someone to come in. It is more about convenience. It pays for itself."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+2

Recommended by65%of homeowners
Avatar for All N One Home Services
All N One Home Services
4.7(
7
)
Water Heater - Install or Replace

Serving Sidon, MS and surrounding areas

In business since 2024

Emergency services offered

Warranties offered

Our Company is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests, and make their concerns the basis of our business.

Response time8 hrs
Response rate100%
Danny's Plumbing And Home Repair
5.0(
2
)
Tankless Water Heater - InstallTankless Water Heater - RepairWater Heater - Install or Replace+1 more

Serving Sidon, MS and surrounding areas

In business since 2011

Free estimates

We're dedicated to providing our clients with the very best in service, installation, and repair for all phases of your plumbing needs. We specialize in a variety of residential and commercial services and take pride in the attention to detail put into each of the projects we're involved with. We're known for our quality work and the integrity of our business. We look forward to building long-term relationships with our clients, and guarantee your satisfaction.

Recommended by100%of homeowners
Albert Plumbing
5.0(
1
)
Water Heater - Install or ReplaceWater Heater - Repair or Service

Serving Sidon, MS and surrounding areas

In business since 2007

Free estimates

Offers commercial services

It can be a daunting task looking for not only the right contractor for your job but also the right contractor for you. We completely understand what you are going through. We know every customer has different desires, different needs, and different schedules. Owner Garrette is not only here to turn your ideas into reality but to make it a memorable experience every step of the way. With over 20 years of experience, we are the experts you need to take care of your home or business. Call Albert Plumbing right now, no matter where you are in the planning process for a free estimate. We look forward to working with you!

Response time10 mins
Recommended by100%of homeowners
Showing 1-10 of 26
Water Heaters questions, answered by experts

Most standard residential water heaters, which are typically around 40 gallons and use 240 volts and between 3,500 and 5,500 watts, require a 30-amp, two-pole circuit breaker. For smaller, point-of-use water heaters using 120 volts and between 1,500 and 3,000 watts, a 30-amp breaker is also often adequate. However, some models may have different needs; units that use more watts than average may require a 40-amp breaker, while smaller units might only need a 20-amp breaker. Newer, tankless, or more energy-efficient models can also require a higher amperage. Having the correct breaker size is crucial for safe and efficient operation, so it's best to consult a licensed electrician to determine the specific needs of your water heater.

The average cost to install a new water heater is approximately $1,300, with a typical price range between $880 and $1,800. The final cost depends on several factors, including the type and size of the unit, its location and accessibility, and the amount of labor required. For example, installing a unit in a tight space like a crawl space can increase labor costs. The type of water heater significantly impacts the price: while a conventional gas heater might cost less than $1,000, tankless models can cost around $2,600 to install (and up to $3,500), and solar heaters can cost upwards of $3,700. Other factors that can affect the total price include the fuel type, vent system requirements, permits, and whether any additional plumbing work or repairs from previous water heater damage are needed.

Most hot water heater manufacturers recommend replacing the anode rod about once every three to five years. Anode rods sacrifice themselves by collecting iron, limestone, and other minerals that would otherwise corrode your hot water heater tank. This abuse wears them out long before your water heater does. Check the rod when you remove it and replace it if more than 50% of the metal has been consumed. Check the rod more frequently if you have hard water or use a water softener. 

No. Expansion tanks must be installed on the supply side (where heated water flows out) of the boiler. There’s also a list of other requirements for most boilers, including being above the pressure relief valves, being on the inner side of any circulator, and more. Your installation manual should have more information on expansion tank installation requirements and what sort of tank the system is made for.

The time it takes to install or replace a water heater depends on the type of heater and the complexity of the job. A professional can typically replace a standard tank-style water heater in one to three hours. However, if the work area is tight, such as a small closet or crawl space, the job could take four to five hours. Replacing an existing tankless unit takes about two to three hours, while upgrading from a tank-style to a tankless water heater is more complex and can take four to six hours. The project will take longer if you are switching fuel sources, such as installing a gas heater which can add about an hour to the timeline, or if the unit needs to be relocated.

The Sidon, MS homeowners’ guide to water heater services

From average costs to expert advice, get all the answers you need to get your job done.