Get matched with top mailbox repairers in Ruleville, MS

Cupping and bowing are both types of wood warping, but they affect the board in different ways. Cupping happens when the edges of a board curl upward or downward, creating a concave or convex shape across its width. Conversely, bowing is when the board curves along its length, forming a gentle arc. 

There are a few reasons that a drawer won't come out. Most of the time, there's an obstruction of some sort preventing the drawer from acting normally. The key to figuring out the problem is investigation and patience. 

If possible, open the drawer as far as it will go and shine a flashlight inside to see if something in the drawer is hitting the cabinet frame. Or, remove a drawer above or below the offending one and use the flashlight to investigate the drawer slides. Discovering the cause will likely provide the necessary information to develop a solution.

Yes, you can repair cat scratches on leather furniture. A quick fix that won’t repair roughness is a leather recoloring balm that helps scratches blend in. Otherwise, use the following process.

1. Clean the area and trim loose fibers.

2. Rub leather binding glue all over the affected area.

3. Sand the area down with fine-grit sandpaper and clean off any residue.

4. Fill holes, scratches, and gouges with leather putty from a leather repair kit.

5. Sand the area down again and clean off any residue.

6. Apply leather colorant in several layers.

7. Seal the color in with a leather sealant and finish.

When water penetrates wood, the wood swells, causing the wood and veneer to separate. This separation creates bubbles on the surface of your furniture. If water spills on wood veneer, it needs to be dried ASAP. Surface spills can cause minor damages like white spots and blushing, but if you’re slow to action, you’re looking at more work—and spending—to restore your wood veneer.