Get matched with top electricians in Moss Point, MS

If the outlet is a GFCI model, this is normal since these outlets have their own breakers that shut off when they encounter a problem—just hitting the reset button should solve the issue. Otherwise, the outlet could have bad wiring, or your circuit breaker could be having issues. If the issue started out of nowhere and is not on a GFCI outelt, it’s best to contact an electrician to diagnose the issue.

Yes, most electric heated bathroom floor systems require a dedicated GFCI-protected circuit to ensure safety and proper function. An electrician may need to upgrade your panel or run new wiring, which can increase installation costs. Always check local building codes and manufacturer recommendations before installation to ensure a safe and compliant setup.

You can convert a gas heater to electric, but it isn’t as simple as swapping a plug or two. First of all, you need to make sure there’s adequate power to the unit, as electric units require much higher power amounts versus gas. Then, you need to close off the gas lines and ventilation. Make sure you don’t also need a permit for an electric water heater—some cities require it. Making the switch can cost upwards of $1,500.

You can determine what size generator you need for a transfer switch by matching the switch to the largest outlet on your generator. Larger generators can power up to 10 circuits, while most 5,000-watt generators can provide power to six circuits. So, if your generator’s largest outlet is 30 amps, you’ll need a 30-amp transfer switch.