Get matched with top interior painters in Falkner, MS

The best and fastest way to remove paint from a deck often involves combining a chemical stripper with a pressure washer. Gel-based paint strippers are highly recommended because their thick consistency makes them less messy and easier to apply than liquid strippers. After applying the stripper to loosen the paint, you can use a pressure washer to efficiently wash away the residue. When using a pressure washer for this task, it's important to use a low pressure (under 1000 PSI) to avoid forcing too much moisture into the wood, which could lead to mildew or rot.

Some homeowners have luck using pressure washers, but this only works for old or weaker concrete sealants and with very powerful pressure washers. You’ll get better results by pressure washing water-based sealants. However, it’s worth trying on any sealant if you’re hoping for the least toxic, least expensive, and most DIY-friendly option. To try this method, rent or buy the most powerful pressure washer you can find and take several passes at the concrete, completely pressure washing the entire area. You may need to repeat the process multiple times to see results.

There are times when you should remove all exterior paint before repainting. This includes when you need to get rid of lead-based paint (which should be done by a pro), or if you need to apply a different finish than what’s already there. Your house may also have too many pre-existing layers of old paint, in which case you’ll be better off getting rid of the old layers first.

You can paint over cracked paint, but only if you properly sand down the damaged areas. Once the surface is as smooth as you can get it, clean the walls and let them dry before applying a new coat of paint. Painting over cracked paint without sanding or cleaning beforehand will not cover up the cracks and may even make them look worse.