Get matched with top stone countertop pros in Edwards, MS

The timeline to install countertops largely depends on the materials and the job size. Installing granite countertops takes anywhere from two to seven hours, though complex designs can pass the eight hour mark. Average-sized quartz countertops take two to five hours to install, though most pros will recommend a 24-hour settling period. Marble, on the other hand, is finicky and can take up to two whole days to install. No matter how you slice it, however, a professional is going to complete the job much quicker than an amateur.

Quartzite countertops are porous, meaning that liquids can seep into the stone and stain them. You’ll need to seal them before installing and resealing annually, depending on use and stone material. Sealing will help prevent stains and etching. On the other hand, you don’t need to seal quartz and other engineered stone countertops since they aren’t porous.

While Caesarstone countertops are heat-resistant, placing hot pots directly on them is not recommended. Extreme heat can cause thermal shock, potentially leading to cracks or discoloration. Always use trivets or heat pads to protect the surface and maintain its appearance and integrity. This precaution helps ensure the longevity of your Caesarstone countertop.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.