Get matched with top metal fabricators and restorers in Decatur, MS

The most idyllic building material that encapsulates the feel of Federal architecture is a brick facade, often with bricks alternating between long side and short side. Palladium and arched transom windows are also prevalent, as are flat, white window lintels. More ornate Federal architecture buildings also include columns on either side of the front door. More important than most of the finer details, though, is the symmetry from the exterior. On the interior, ornate plaster moldings and plaster ceiling medallions are indicative of the style.

Pet-resistant, vinyl-coated polyester is one of the strongest window screen materials available, with some manufacturers touting a 7x increase in strength compared to standard fiberglass screens. Stainless steel security screens are also extremely strong, but they’re not suitable for coastal areas due to the risk of corrosion from salty sea air. If sea air isn’t a concern, stainless steel is extremely tough.

Corrugated metal has been pressed so that it has alternating ridges or grooves. Metal that has undergone this process becomes incredibly strong, with some of the highest strength-to-weight ratios of any material. It's lightweight and has an increased surface area when compared to a flat sheet of metal. Both of these attributes contribute to its coveted strength. It's used for fencing because it's weather- and impact-resistant, rarely needs maintenance, and lasts many years—for a relatively low cost. 

Some welding projects, such as repairing pipes or fences, require travel, whereas others, like furniture repair, do not necessarily require the welder to come to you. Travel and overhead factor into the overall cost of your welding project. Some of the most common welding projects include:

• Metal furniture repair: $35–$100

• Pipe repair: $200–$1,000

• Small gates: $550–$750

• Fencing: $1,200–$1,800

• Fabricated sheet metal welding: $750–$2,500