Get matched with top roofers in your area

Most manufacturers’ warranties do not cover wind damage to roof shingles, but some companies include a wind warranty rider in their warranty offer. You can purchase this rider to protect yourself, your wallet, and your roof from any damage that might occur from wind. Be sure to read all the fine print and understand any limitations of the warranty.

Flapping shingles, or shingles that are lifting or curling away from your roof, can be glued back into place using roofing cement or sealant. Apply the glue underneath the shingle, then press it down firmly. You can leave a brick on top of the shingle to hold it in place overnight while the sealant dries.

A chimney cap costs about $300 on average to install, with prices ranging from $75 to $1,000. The final cost depends on several factors, including the professional you hire, the accessibility of your chimney, the cap's material and size, whether any repairs are needed, and if it requires custom fabrication. Chimney caps are usually made from galvanized steel, stainless steel, or copper. Copper caps are the most expensive, followed by stainless steel and then galvanized steel. Excluding labor, average material costs are around $100 for galvanized steel, $250 for stainless steel, and $600 for copper. You may also face additional costs, such as hiring a chimney sweep to clean the chimney before the cap is installed.

The four types of roof sheathing are plywood, oriented strand board (OSB), planks, and tone-and-groove boards. The overwhelming majority of homes use the first two (especially OSB) and the other two are not often seen outside of special use cases. Methods of sheathing include solid sheathing, open sheathing where there are gaps, and plank sheathing. Most roofs are solid sheathing.